Panasonic VARICAM LT, Руководство по эксплуатации

Страница: 115 / 182

– 115 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[VERSION] Displays the information of the camera.
[MODEL]: Displays the product name.
[SERIAL NO.]: Displays the serial number.
[PRODUCT VERSION]: Displays the version.
[UPDATE] Performs an update of the camera firmware. (Enabled only when there is a dedicated update file on the SD
memory card.)
[YES], [NO]
[USB] Switches the camera to mode for USB device function.
[YES], [NO]
[TRACE LOG] Reads the camera’s execution log from an SD memory card.
[YES], [NO]
[SENSOR TEMP] Displays the temperature around the sensor of the camera.
[INITIALIZE] [LOAD FACTORY DATA] Returns the menu values to their factory settings.
[YES], [NO]
[CAMERA SETTINGS]
Sets the basic camera function.
[WHITE]/[BLACK]/[EI] is enabled only when [MENU]
→ [SYSTEM SETTINGS] → [COLOR SETTING] → [MAIN] is set to [V-Log].
Item Description of settings
[FPS] [VFR SW] Enables/disables variable frame rate.
[ON]:
Enables the variable frame rate function. The arbitrary frame rate can be set in [VALUE]. Audio
cannot be recorded.
[OFF]:
Disables the variable frame rate function.
[VFR SW] will be fixed to [ON] when [SYSTEM SETTINGS] → [SYSTEM MODE] → [MAIN CODEC] is set
to [AVC-Intra4K-LT]/[AVC-Intra2K-LT]/[AVC-Intra-LT].
However, it will not be fixed when [FREQUENCY] in [AVC-Intra4K-LT] is set to [50.00p] or [59.94p].
f
Factory setting: [OFF]
[VALUE] Selects from a maximum of 150 registered values.
f
Factory setting: [23.98fps]
[ADD] Newly registers to the list. The value newly registered can be selected with [VALUE].
It will replace the currently selected value when there are 150 registered already.
[DELETE] Deletes from the list. Deletion is not possible when there is only one registered value.
[YES], [NO]
[WHITE] [AWB] Executes automatic white balance.
[EXECUTE], [CANCEL]
[VALUE] Selects a value from a maximum of 12 registered values.
Preset values that can be selected in the factory settings are [3200K + 0.0GMg], [4300K + 0.0GMg],
[5600K + 0.0GMg], and [6300K + 0.0GMg].
f
Factory setting: [3200K + 0.0GMg]
[ADD] Newly registers to the list. The value newly registered can be selected with [VALUE].
It will replace the currently selected value when there are 12 registered already.
[DELETE] Deletes from the list. Deletion is not possible when there is only one registered value.
[YES], [NO]
[BLACK] [ABB] Executes automatic black balance. When executing automatic black balance, put the cap on the lens to
keep any light from entering the image sensor.
[EXECUTE], [CANCEL]
[NR] [ISO800] Switches the noise reduction effect in the range of ISO200 to ISO4000.
[ON], [OFF]
This will be in the range between ISO200 and ISO2000 when [MAIN CODEC] is set to [AVC-Intra2K-LT]/
[AVC-Intra-LT], and [MAIN PIXEL] is set to [2048 × 1080 CROP]/[1920 × 1080 CROP].
The range is within [NORMAL] in the [GAIN MODE] setting when the [MODE] setting in [EI] is set to [dB].
f
Factory setting: [OFF]
[ISO5000] Switches the noise reduction effect in the range of ISO5000 to ISO12800.
[ON], [OFF]
This will be in the range between ISO2500 and ISO6400 when [MAIN CODEC] is set to [AVC-Intra2K-LT]/
[AVC-Intra-LT], and [MAIN PIXEL] is set to [2048 × 1080 CROP]/[1920 × 1080 CROP].
The range is within [HIGH] in the [GAIN MODE] setting when the [MODE] setting in [EI] is set to [dB].
f
Factory setting: [OFF]
[EI] [MODE] Switches the EXPOSURE INDEX control unit.
[ISO], [dB]
f
Factory setting: [ISO]
[ISO SELECT] Selects the operation of ISO.
[NATIVE ONLY], [800BASE], [5000BASE]
f
Factory setting: [NATIVE ONLY]
[NATIVE ISO] Sets the value when [NATIVE ONLY] is selected.
[800ISO], [5000ISO]
This will be [400ISO] or [2500ISO] when [MAIN CODEC] is set to [AVC-Intra2K-LT]/[AVC-Intra-LT], and
[MAIN PIXEL] is set to [2048 × 1080 CROP]/[1920 × 1080 CROP].
f
Factory setting: [800ISO]