Panasonic VARICAM LT, Руководство по эксплуатации

Страница: 117 / 182

– 117 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[A.IRIS PEAK/AVE] Sets the ratio included in the peak for auto iris standard.
[0] - [100]
f
Factory setting: [30]
[ONE PUSH A. IRIS] Executes the one-push auto iris.
[EXECUTE], [CANCEL]
[EF LENS IRIS MODE] Sets the operation of the iris when [EF] is selected.
[MANUAL]: Manual control
[AUTO]: Auto control
f
Factory setting: [MANUAL]
[SCENE FILE SETTINGS]
Sets the detailed image quality adjustment of the camera video.
[WHITE]/[BLACK]/[EI] is enabled only when [MENU]
→ [SYSTEM SETTINGS] → [COLOR SETTING] → [MAIN] is set to anything other than [V-Log].
Item Description of settings
[NAME EDIT] Edits the name of the scene file selected in the scene file menu. (Maximum 8 characters)
[SCENE DATA] [LOAD] Selects and reads the scene file saved in the internal memory of the camera.
[YES], [NO]
[SAVE] Saves the current setting value as a scene file in the memory inside the camera by specifying the title and
the file number.
[YES], [NO]
[INITIALIZE] Returns the selected scene file (1 to 6) to the factory setting.
[YES], [NO]
[WHITE] [AWB] Executes automatic white balance.
[EXECUTE], [CANCEL]
[VALUE] Selects a value from a maximum of 12 registered values.
Preset values that can be selected in the factory settings are [3200K + 0.0GMg], [4300K + 0.0GMg],
[5600K + 0.0GMg], and [6300K + 0.0GMg].
f
Factory setting: [3200K + 0.0GMg]
[ADD] Newly registers to the list. Newly registered value can be selected with [VALUE]. It will replace the currently
selected value when there are 12 numbers registered already.
[DELETE] Deletes from the list. Deletion is not possible when there is only one registered value.
[YES], [NO]
[R GAIN] Adjusts the Rch gain.
[ − 200] - [200]
f
Factory setting: [0]
[B GAIN] Adjusts the Bch gain.
[ − 200] - [200]
f
Factory setting: [0]
[AWB OFFSET] Sets the Rch gain and Bch gain value when performing automatic white balance.
[ON]: Maintains and adds the values of [R GAIN] and [B GAIN] after performing automatic white balance.
[OFF]: Resets the value of [R GAIN] and [B GAIN] after performing automatic white balance.
f
Factory setting: [OFF]
[SHOCKLESS WHITE] Sets the transition time when switching preset values.
[OFF]: Values are immediately switched.
[1]: Switches in approximately one second.
[2]: Switches in approximately two seconds.
[3]: Switches in approximately five seconds.
f
Factory setting: [OFF]
[BLACK] [ABB] Executes automatic black balance. When executing automatic black balance, put the cap on the lens to
keep any light from entering the image sensor.
[EXECUTE], [CANCEL]
[M.PED] Sets the master pedestal level.
[ − 100] - [100]
f
Factory setting: [0]
[R PED] Adjusts the Rch pedestal level.
[ − 100] - [100]
f
Factory setting: [0]
[G PED] Adjusts the Gch pedestal level.
[
−
100] - [100]
f
Factory setting: [0]
[B PED] Adjusts the Bch pedestal level.
[ − 100] - [100]
f
Factory setting: [0]
[ABB OFFSET] Sets the Rch, Gch, and Bch pedestal levels after adjusting the automatic black balance.
[ON]:
Maintains and adds the values of [R PED], [G PED], and [B PED] after performing the automatic
black balance.
[OFF]:
Resets the values of [R PED], [G PED], and [B PED] after performing the automatic black balance.
f
Factory setting: [OFF]
[EI] [MODE] Switches the EXPOSURE INDEX control unit.
[ISO], [dB]
f
Factory setting: [ISO]