Panasonic VARICAM LT, Руководство по эксплуатации

Страница: 116 / 182

– 116 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[800BASE ISO] Sets the value when [800BASE] is selected.
[200ISO], [250ISO], [320ISO], [400ISO], [500ISO], [640ISO], [800ISO], [1000ISO], [1250ISO],
[1600ISO], [2000ISO], [2500ISO], [3200ISO], [4000ISO]
This will be [200ISO], [250ISO], [320ISO], [400ISO], [500ISO], [640ISO], [800ISO], [1000ISO], [1250ISO],
[1600ISO], or [2000ISO] when [MAIN CODEC] is set to [AVC-Intra2K-LT]/[AVC-Intra-LT], and [MAIN
PIXEL] is set to [2048 × 1080 CROP]/[1920 × 1080 CROP].
f
Factory setting: [800ISO]
[5000BASE ISO] Sets the value when [5000BASE] is selected.
[1250ISO], [1600ISO], [2000ISO], [2500ISO], [3200ISO], [4000ISO], [5000ISO], [6400ISO], [8000ISO],
[10000ISO], [12800ISO]
This will be [1250ISO], [1600ISO], [2000ISO], [2500ISO], [3200ISO], [4000ISO], [5000ISO], or [6400ISO]
when [MAIN CODEC] is set to [AVC-Intra2K-LT]/[AVC-Intra-LT], and [MAIN PIXEL] is set to [2048 × 1080
CROP]/[1920 × 1080 CROP].
f
Factory setting: [5000ISO]
[GAIN MODE] Sets the operation when [dB] is selected.
[NORMAL], [HIGH]
f
Factory setting: [NORMAL]
[GAIN SELECT] Sets the value when [dB] is selected.
[ − 12dB], [ − 10dB], [ − 8dB], [ − 6dB], [ − 4dB], [ − 2dB], [0dB], [2dB], [4dB], [6dB], [8dB], [10dB], [12dB],
[14dB]
This will be [ − 6dB], [ − 4dB], [ − 2dB], [0dB], [2dB], [4dB], [6dB], [8dB], [10dB], [12dB], or [14dB] when [MAIN
CODEC] is set to [AVC-Intra2K-LT]/[AVC-Intra-LT], and [MAIN PIXEL] is set to [2048 × 1080 CROP]/
[1920 × 1080 CROP].
f
Factory setting: [0dB]
[SHUTTER] [SW] Enables/disables the shutter function.
[ON], [OFF]
f
Factory setting: [ON]
[DISPLAY MODE] Sets the shutter display unit.
[sec]: Displays in time.
[deg]: Displays at shutter open angle.
f
Factory setting: [deg]
[VALUE deg] Selects the angle control ([deg]) value from the maximum of 12 registered values.
Preset values that can be selected in the factory settings are [11.5], [22.5], [45.0], [90.0], [120.0], [144.0],
[172.8], [180.0], [270.0], and [358.0].
f
Factory setting: [180.0]
[VALUE sec] Selects the time control ([sec]) value from the maximum of 12 registered values.
Preset values that can be selected in the factory setting are [1/60], [1/100], [1/120], [1/250], [1/500],
[1/1000], and [1/2000].
f
Factory setting: [1/60]
[ADD deg] Newly registers the angle control ([deg]) value to the list.
Newly registered value can be selected with [VALUE].
It will replace the currently selected value when there are 12 numbers registered already.
[ADD sec] Newly registers the time control ([sec]) value to the list.
Newly registered value can be selected with [VALUE].
It will replace the currently selected value when there are 12 numbers registered already.
[DELETE deg] Deletes the angle control ([deg]) value from the list.
Deletion is not possible when there is only one registered value.
[YES], [NO]
[DELETE sec] Deletes the time control ([sec]) value from the list.
Deletion is not possible when there is only one registered value.
[YES], [NO]
[LENS SETTING] [LENS CONNECT
TYPE]
Sets the type of lens to be connected.
[EF]:
Lens controlled with EF
[LDS]: Lens controlled with LDS (Lens Data System)
[B4]:
Lens controlled with 12-pin connector
[Cook-i]: Lens controlled with cooke/i communication
[OFF]:
Other lenses
f
Factory setting: [EF]
[A.IRIS TYPE] Sets the location to control the speed of the auto iris when [LENS CONNECT TYPE] is set to [B4].
[LENS]: Lens volume
[CAM]:
Set with [A.IRIS SPEED]
f
Factory setting: [LENS]
[A.IRIS SPEED] Sets the speed of the auto iris when [LENS CONNECT TYPE] is set to [B4] and [A.IRIS TYPE] is set to
[CAM].
[1] - [20]
f
Factory setting: [10]
[A.IRIS LEVEL EFFECT] Sets the target value during auto iris operation.
[0] - [100]
f
Factory setting: [50]
[A.IRIS WINDOW] Selects the auto iris detection window.
[NORMAL1]: Window that is near screen center.
[NORMAL2]: Window that is near screen bottom.
[CENTER]: Window that is a spot in the screen center.
f
Factory setting: [NORMAL1]