Panasonic TC-42PD1FA, Руководство по эксплуатации

Страница: 29 / 32

29
The Wide Plasma Display
(SERIAL terminal)
RS-232C Conversion cable Computer
Details
2.5mm dia.
3-pin female
2.5mm dia.
3-pin male
D-sub 9-pin
female
Details
TXD A A
$
RXD
RXD B B
%
TXD
GND C C
(
GND
Shorted
&
)
Shorted
*
+
NC
#
•
-
Communication parameters
Signal level RS-232C compliant
Synchronisation method Asynchronous
Baud rate 9600 bps
Parity None
Character length 8 bits
Stop bit 1 bit
X parameter None
S parameter None
SERIAL terminal
The SERIAL terminal conforms to the RS-232C interface specification, so that the Wide Plasma Display can be
controlled by a computer which is connected to this terminal.
You can control the Wide Plasma Display with a computer by using the TY-SCP02RS1E (optional accessory).
The computer will require software which allows the sending and receiving of control data which satisfies the conditions
given below. Use a computer application such as a programming language to create the software. Refer to the
documentation for the computer application for details.
Pin layout and signal names
SERIAL
REMOTE
7 8 9 6
1 2 3 4 5
TXD A
RXD B
GND C
A
B C
SERIAL terminal
(2.5 mm 3-pin female) RS-232C Conversion cable
(2.5 mm 3-pin male) Pin Layout for RS-232C Conversion
cable (D-sub 9-pin female)
Basic format for control data
The transmission of control data from the computer starts
with an STX signal, followed by the command, the
parameters, and lastly an ETX signal in that order. If there
are no parameters, then the parameter signal does not
need to be sent.
Note:
(1) If multiple commands are transmitted, be sure to wait
for the response for the first command to come from
this unit before sending the next command.
(2) If an incorrect command is sent by mistake, this unit will
send an “ER401” command back to the computer.
Command
STX ETX C1 C2 C3 P1 P2 P3 P4 P5 :
Start
(02h)
End
(03h)
3-character
command (3 bytes)
Parameter(s)
(1 - 5 bytes)
Colon
Command Parameter Control details
PON None Power ON
POF None Power OFF
AUU None Volume increase
AUD None Volume decrease
AMT None Mute (toggle)
IIS None
VID
YP1
RG1
Input select (toggle)
AV Mode
Component/RGB mode
(processed as a Y/P
B
/P
R
or
RGB signal as set by this unit)
PC mode
DAM None
NORM
ZOOM
FULL
JUST
SELF Screen mode select (toggle)
4:3
Zoom1
16:9
Just
Panasonic Auto