18
ASPECT Controls
1
ASPECT-AUTO Button (Panasonic Auto)
Press the ASPECT-AUTO button to switch to
Panasonic Auto mode. The display will
automatically become enlarged.
Note:
(1) If an S1 signal is detected while Panasonic Auto mode is
active, the aspect mode will change to “16:9”.
(2) If a 525p or 1080i signal is input during Component input
signal mode and during RGB and PC input signal mode the
controls will not operate.
2
ASPECT-MANUAL button
The aspect mode changes each time the
ASPECT-MANUAL button is pressed.
Note:
(1) During RGB and PC input signal mode, the mode switches
between “4:3” and “16:9” only.
(2) For a 525p (480p) signal input during “Component” input
signal mode, the mode switches between “Zoom1” and
“16:9” only.
(3) When an S1 signal is being received during “S-Video” input
signal mode, the mode is set to “16:9” mode.
(4) When a 1080i signal is being received, the mode is set to
“16:9” mode, and switching is not possible.
(5) The aspect mode is memorised separately for different
input signal formats (NTSC/PAL/SECAM, 525p, RGB and
PC). (525p includes 525i and 625i signals.)
PLASMA DISPLAY
INPUT
PC
MANUAL-ASPECT-AUTO
PICTURE MODE
MENU
N
STR
PICTURE
POS./SIZE
1
2
AUTO
ASPECT-
Panasonic Auto
For an elongated image
Image is expanded
For a 4:3 image
Changes in accordance with the
Panasonic Auto mode setting.
(Refer to page 28.)
MANUAL-ASPECT
Just
Zoom1
Zoom2
4:3
16:9
The Wide Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen “cinema
format” picture.
