21
During “RGB” and “PC” input signal modes
Choose the option and adjust by pushing the Position
Up “
F
” or Down “
G
” buttons, and by setting with the
Position Left “
I
” or Right “
H
” buttons.
Note:
(1) The same adjustment details are memorised in both RGB and PC input signal modes for each type of input signal
(frequency).
Helpful Hint (
Normalisation)
If the N button on the remote control unit is pressed when the Picture Pos./Size display is active, all adjustment
values will be returned to the factory setting level.
Mode
Picture
H-pos
When the Position Left “
I
” button is pressed
When the Position Right “
H
” button is pressed
V-pos
When the Position Left “
I
” button is pressed
When the Position Right “
H
” button is pressed
H-size
When the Position Left “
I
” button is pressed
When the Position Right “
H
” button is pressed
V-size
When the Position Left “
I
” button is pressed
When the Position Right “
H
” button is pressed
Clock
Phase
Flickering and distortion can be eliminated by using the Position Left “
I
” or Right “
H
” button to carry
out adjustment.
Clock Phase
V-size
H-size
V-pos
H-pos
Exit
PICTURE
POS./SIZE
Picture Pos./Size
Normal
Adjust
Select
N
PICTURE POS./SIZE Controls
