15
Connections
How to connect the AV Output Terminal to other equipment
The video output terminal outputs the signals which are input to the video input terminal.
Note:
(1) The signal from the video output terminal is identical to the signal fed to the video input terminal.
(2) Additional equipment and cables shown are not supplied with this set.
How to connect the SERIAL Terminal
The SERIAL terminal is used when the Wide Plasma Display is controlled by a computer.
Note:
(1) Use the TY-SCP02RS1E RS-232C conversion cable (optional accessory) to connect the computer to the Wide
Plasma Display.
(2) Refer to page 29 for details of the control method for the Wide Plasma Display.
(3) The computer shown is for example purposes only.
(4) Additional equipment and cables shown are not supplied with this set.
IN
R
AUTO
75 /HI-Z
OUT
L
IN
VIDEO
AUDIO
S-VIDEO
AV
VIDEO
Monitor
Video Output Terminal
Video Input Terminal
Video output to BNC socket
BNC Video
cable
Ferrite sleeve
(Supplied)
less than
20 cm
The Wide Plasma
Display rear terminals
SERIAL
TUNER IN
REMOTE
PC IN
RS-232C conversion cable(optional accessory)
D-SUB 9pin
COMPUTER
The Wide Plasma Display
rear terminals
