8
RQT8672
STEP
1
Front and surround speaker assembly
[RT70]
Preparation
≥
To prevent damage or scratches, lay down a soft cloth and perform
assembly on it.
≥
For assembly, use Phillips-head and flathead screwdrivers.
≥
Make sure you have all the indicated components before starting assembly,
positioning, and connection.
≥
The front and surround speaker pairs as well as the stand pairs are
different.
–Check the label on the rear of the front speaker before attaching the stand
(
➡
right).
–The stand with the shorter cable is for the front speaker.
≥
For optional wall mount, refer to page 17.
1
Attach the stand to the base.
1
Thread the speaker cable through the base.
For quicker threading, loosely fold the cable in half (do not
crease), pass the folded portion through the hole, and then
pull the rest of the cable through the base.
2
Attach the stand to the base while gently pulling
on the end of the speaker cable.
2
Secure the stand to the base.
2 Front and 2
Surround speakers
(with cover plate)
4 Stands
≥
2
a
Stands with short cable: For front speakers
≥
2
a
Stands with long cable: For surround
speakers
4 Bases
16 Screws
Included parts to be used
Speaker labels
Front speakers
Cable
Base
Stand
Cable
Pull gently.
Base
Screws
Tighten securely.
Stand
Base
Screws
Tighten securely.
Slide the speaker cable into the groove.
RT70-30.book Page 8 Thursday, April 13, 2006 1:45 PM