54
RQT8672
Resetting channel setting
Refer to the control reference on page 53.
You can restart auto channel setting if the channel reception
setting (
➡
18) fails for some reason.
After performing steps 1-4 (
➡
53)
5
Press [
3
,
4
] to select “Auto-Setup
Restart” or “Download from TV” and
press [ENTER].
The confirmation screen appears.
Select “Download from TV” when you connect the unit
to a Q Link-compatible TV with a fully wired 21-pin
Scart lead.
(Programme positions are downloaded from the TV
and copied through this convenient function.)
6
Press [
2
,
1
] to select “Yes” and
press [ENTER].
You can also use the following method to restart Auto-Setup.
When the unit is on and stopped
Press and hold [
X
CH] and [CH
W
] on this unit for about
5 seconds.
≥
All the settings except for the ratings level, ratings
password, Owner ID and time settings return to the factory
preset. The timer recording programmes are also
cancelled.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
Automatic setting
TV System
Change this setting if you connect an NTSC television or to
record NTSC video from another source.
1
While stopped
Press [FUNCTIONS].
2
Press [
3
,
4
] to select “To Others” and
press [ENTER].
3
Press [
3
,
4
] to select “Setup” and
press [ENTER].
4
Press [
3
,
4
] to select “Connection”
and press [
1
].
5
Press [
3
,
4
] to select “TV System”
and press [ENTER].
6
Press [
3
,
4
] to select the TV system
and press [ENTER].
≥
PAL
(factory preset)
–Select when connecting to a PAL or Multi-system
television. Programmes recorded using NTSC are
played as PAL 60.
–Select to record television programmes and PAL
input from other equipment.
≥
NTSC
–Select when connecting to a NTSC television.
Television programmes cannot be recorded properly.
–Select to record NTSC input from other equipment.
The confirmation screen appears.
7
Press [
2
,
1
] to select “Yes” and press
[ENTER].
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
∫
To change the setting all at once (PAL
,.
NTSC)
While stopped, press and hold [
∫
] and [
<
OPEN/CLOSE]
on this unit at the same time for about 5 seconds.
Setup
TV System
PAL
NTSC
Disc
Picture
Sound
Display
Tuning
Connection
Others
ENTER
RETURN
SELECT
RT70-30.book Page 54 Thursday, April 13, 2006 1:45 PM