Panasonic SC-PT870, Руководство по эксплуатации

Страница: 27 / 40

27
RQ
TX02
27
Getting S
tarted
Playing
Discs
Ot
her Op
era
tions
Reference
§
Refer to “Frame still and field still” ( B 31, Glossary).
VIDEO OUT – SCART
Choose the video signal format to be output from the
SCART (AV) and COMPONENT VIDEO OUT terminals.
≥
VIDEO/YPbPr
≥ S-VIDEO/YPbPr
≥
RGB 1/NO OUTPUT: (Only when connected to a RGB
compatible TV)
If you always would like to view the picture from the unit in
RGB signal, select this mode. The TV screen will
automatically switch to display the picture from the unit
when the unit is turned on.
≥ [RGB\2/NO\OUTPUT]
: (Only when connected to a RGB
compatible TV)
When in TV tuner mode, if the selector is set to “DVD/CD”,
the TV screen will automatically switch to display the picture
from the unit only during disc playback (
[DVD-V] [DVD-VR]
[VCD]
) or when viewing on-screen menu of DVD/CD.
The TV picture will be displayed when the selector is set to
“AV”. With other selectors, the picture from this unit will be
displayed.
Select to suit the type of equipment you connected to the
HDMI AV OUT terminal.
Select “BITSTREAM” when the equipment can decode the
bitstream (digital form of 5.1-channel data). Otherwise,
select “PCM”.
(If the bitstream is output to the equipment without a
decoder, high levels of noise can be output and may
damage your speakers and hearing.)
DOLBY DIGITAL
§
≥ [BITSTREAM]
≥
PCM
DTS
§
≥ [BITSTREAM]
≥
PCM
MPEG
§
≥ BITSTREAM
≥
[PCM]
§
When audio is output from HDMI AV OUT terminal, and
the connected equipment does not support the item
selected, the actual output will depend on the
performance of this connected equipment.
(Continued on next page)
STILL MODE
Specify the type of picture shown when paused.
≥ [AUTO]
≥ FIELD
§
: The picture is not blurred, but picture quality is
lower.
≥
FRAME
§
:Overall quality is high, but the picture may
appear blurred.
VIDEO OUT (I/P)
Select “PROGRESSIVE” only if connecting to a progressive
output compatible TV.
≥ [INTERLACE]
≥
PROGRESSIVE: A message screen will appear. Follow
the on-screen instructions.
AUDIO menu
DYNAMIC RANGE
≥
ON: Adjusts for clarity even when the volume is low.
Convenient for late night viewing. (Only works with
Dolby Digital)
≥ [OFF]
SPEAKER SETTINGS
Select the delay time of the speakers.
(Effective when playing 5.1-channel sound)
(Center and surround speakers only)
For optimum listening with 5.1-channel sound, all the
speakers, except for the subwoofer, should be the same
distance from the seating position.
If you have to place the center or surround speakers closer
to the seating position, adjust the delay time to make up for
the difference.
If either distance
a
or
b
is less than
c
, find the difference
in the table and change to the recommended setting.
a
Center speaker
b
Surround speaker
Difference
(Approx.)
Setting Difference
(Approx.)
Setting
30 cm 1ms 150 cm 5ms
60 cm 2ms 300 cm 10ms
90 cm 3ms 450 cm 15ms
120 cm 4ms
150 cm 5ms
≥
SETTINGS:
≥ C DELAY (Center Delay):
[0ms]
, 1ms, 2ms, 3ms, 4ms, 5ms
Select the delay time for your center speaker.
≥ LS/RS DELAY (Left Surround/Right Surround Delay):
[0ms]
, 5ms, 10ms, 15ms
Select the delay time for your surround speakers.
≥
TEST TONE: SETTING
Use the test tone for speaker level adjustments ( B 15,
Adjusting the speaker output level manually).
DISPLAY menu
LANGUAGE
Choose the language for the on-screen messages.
≥
[ENGLISH]
≥ FRANÇAIS ≥ ESPAÑOL ≥ DEUTSCH
≥ ITALIANO ≥ SVENSKA ≥ NEDERLANDS
≥
POLSKI
L
LS
R
SW
C
RS
C
RS LS
  



: Actual speaker position
: Ideal speaker position
: Primary listening
distance
Approximate room dimensions
Circle of constant primary listening distance
RQTX0227-B_eng.book Page 27 Wednesday, December 17, 2008 11:28 AM