21
RQ
TX02
27
Getting S
tarted
Playing
Discs
Ot
her Op
era
tions
Reference
Confirming HDMI information
1
Connection status
2
Shows the output signal type.
3
Shows the number of audio channels.
4
(
B
above, VIDEO FORMAT)
5
(
B
above, COLOUR SPACE)
[Note]
When “OFF” is selected in “AUDIO OUT” (
B
28, HDMI
menu), “– – –” will be displayed in “AUDIO STREAM”.
ROTATION
To rotate a picture
(during pause)
[JPEG]
:
0
,------.
90
,------.
180
,------.
270
^--------------------------------------------J
Menu 2 (Video)
PICTURE
MODE
NORMAL
CINEMA1:
CINEMA2:
DYNAMIC:
ANIMATION:
Mellows images and
enhances detail in dark
scenes.
Sharpens images and
enhances detail in dark
scenes.
Enhances the contrast for
powerful images.
Suitable for animation.
ZOOM
To select zoom sizes
NORMAL, AUTO (
[DVD-VR]
[DVD-V]
[VCD]
),
k
2,
k
4
≥
[JPEG]
: during pause
TRANSFER
MODE
If you have chosen “480p”/“576p”/
“720p”/“1080p” (progressive), “1080i”
(interlaced) [“VIDEO FORMAT” in Menu
4 (HDMI)] or “PROGRESSIVE” under
“VIDEO OUT (I/P)” (
B
27, VIDEO
menu), select the method of conversion
for progressive output to suit the type of
material.
≥
The setting will return to “AUTO” or
“AUTO1” when the disc tray is opened,
the unit is turned off or another source
is selected.
When playing PAL discs
AUTO:
VIDEO:
FILM:
Automatically detects the
film and video content, and
appropriately converts it.
Select when using
“AUTO”, and the content
is distorted.
Select this if
the edges of
the film
content
appear jagged or rough
when “AUTO” is selected.
However, if the video
content is distorted as
shown in the illustration to
the right, then select
“AUTO”.
When playing NTSC discs
AUTO1:
AUTO2:
VIDEO:
Automatically detects the
film and video content, and
appropriately converts it.
In addition to “AUTO1”,
automatically detects film
contents with different
frame rates and
appropriately converts it.
Select if the video content
is distorted when using
“AUTO1” or “AUTO2”.
SOURCE
SELECT
[DivX]
When you select “AUTO” the
constructing method of the DivX
contents is automatically distinguished
and output. If the picture is distorted,
select “INTERLACE” or
“PROGRESSIVE” depending on which
constructing method was used when the
contents were recorded to disc.
AUTO,
INTERLACE
, PROGRE
SS
IVE
Menu 3 (Audio)
DIALOGUE
ENHANCER
To make the dialogue in movies
easier to hear
[DVD-V]
(Dolby Digital, DTS, 3-channel
or higher, with the dialogue recorded in
the center channel)
[DivX]
(Dolby Digital, 3-channel or
higher, with the dialogue recorded in the
center channel)
OFF, ON
Menu 4 (HDMI)
HDMI STATUS
To show HDMI information.
(
B
below, Confirming HDMI
information)
HD ENHANCER
This works when the HDMI connection
is being used with “VIDEO PRIORITY”
(
B
28, HDMI menu) set to “ON”.
To sharpen the “720p”, “1080i” and
“1080p” picture quality
OFF, 1 (weakest) to 3 (strongest)
VIDEO FORMAT
This works when the HDMI connection
is being used with “VIDEO PRIORITY”
(
B
28, HDMI menu) set to “ON”.
To select suitable picture quality
with your TV
(Video recordings will be converted to,
and output as, high-definition video.)
§
480p/576p/720p/1080p
(progressive)
§
480i/576i/1080i
(interlaced)
≥
If the picture is distorted, press and
hold [CANCEL] until the picture is
displayed correctly. (The output will
return to “480p”/“576p”.)
§
The numbers displayed depend on
the disc being played. One of the
above numbers is displayed.
COLOUR
SPACE
This works when the HDMI connection
is being used with “VIDEO PRIORITY”
(
B
28, HDMI menu) set to “ON”.
To select suitable picture colour with
your TV
YCbCr 4:2:2
YCbCr 4:4:4
RGB
≥
If the setting above is not compatible
with your TV, it will not be displayed.
e.g.
HDMI
HDMI --- INFORMATION
CONNECTED STATE
AUDIO STREAM
MAX CHANNEL
VIDEO FORMAT
COLOUR SPACE
CONNECTED
PCM
2ch
720p
YCbCr 4:4:4
1
2
3
4
5
RQTX0227-B_eng.book Page 21 Wednesday, December 17, 2008 11:28 AM
