6
RQ
TX02
27
Getting S
tarted
[PT570]
Front speaker
[PT870]
Front and surround speakers
Preparation
≥
To prevent damage or scratches, lay down a soft cloth and
perform assembly on it.
≥
For assembly, use a Phillips-head screwdriver (not included).
≥
You will need to obtain the appropriate screw eyes to match
the walls or pillars to which they are going to be fastened.
≥
Consult a qualified housing contractor concerning the
appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support. Improper
attachment may result in damage to the wall or speakers.
e.g.
Front speaker
Caution
Do not stand on the base. Be cautious when children are
near.
step 1
Assembling the speakers
Speaker assembly option
[PT570]
[PT870]
2 Front speakers
2 Front speakers
2 Surround speakers
[PT570]
[PT870]
2 Stands (with cable)
4 Stands (with cable)
[PT570]
2 Bases
[PT870]
4 Bases
[PT570]
8 Screws
[PT870]
16 Screws
Make sure you have all the indicated components before starting assembly, setup, and connection.
≥
Keep the screws out of reach of children to prevent swallowing.
≥
For optional wall mount, refer to page 30.
1
2
2
1
Slide into the groove.
Press into the groove.
Tighten securely.
Tighten securely.
Insert the wire fully.
Push!
Position the
cable between
the ridges.
Leave about 120 mm.
: White
: Blue
Thread the speaker cable
through the base.
Attach the speaker.
Insert the wire
fully.
Push!
: White
: Blue
Slide into
the groove.
Press into the groove.
Tighten securely.
You can remove and use
the cable from the stand.
To reattach the cable, refer to page 30.
Leave about
120 mm.
Preventing the speakers from falling
String
(not included)
Thread from the wall to the speaker and tie tightly.
Rear of the
speaker
Screw eye
(not included)
Approx.
150 mm
Wall
e.g. Front speaker
DO
NOT
Q
U
ICK ST
AR
T GUIDE
Q
U
IC
K
S
TA
R
T
G
U
ID
E
Q
U
ICK ST
AR
T GUIDE
step 1
RQTX0227-B_eng.book Page 6 Wednesday, December 17, 2008 11:28 AM
