27
RQT7621
REC
ORDING
Preparation
≥
Change the settings in the SETUP menu as follows (
➡
page 50).
–“AV2 Input”: “RGB (Not NTSC)”
–“AV2 Connection”: “Normal”
Follow the steps indicated for manually
programming timer recordings
(
➡
page 26).
≥
Make sure you connect to the “TV Scart terminal” of a Sky Digital
STB with a 21-pin Scart lead.
≥
Set your Sky Digital STB to output “RGB” signals.
≥
After setting the Personal Planner programmes as required, Sky
Digital STB must be left on (not set to standby) to ensure
continuous output of RGB signals.
≥
Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
∫
To change a programme
Press [
3
,
4
] to select the programme and press [ENTER].
(
➡
step 3 on page 26, Manually programming timer recordings)
∫
To delete a programme
Press [
3
,
4
] to select the programme and press [
¢
CANCEL].
∫
To exit the timer recording list
Press [PROG/CHECK].
∫
To put the unit on timer recording standby
Press [
F
TIMER].
“
F
” lights on the unit’s display to indicate timer recording standby
has been activated.
≥
Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
[HDD]
[RAM]
[DVD-R]
If an external equipment (for example a satellite receiver) with a
timer function is connected to the AV2 terminal of this unit by a
21-pin Scart lead (
➡
page 12, 13), it is possible to control the
recording of the unit with the equipment.
Preparation
≥
Change the “Ext Link” in the SETUP menu to match the connected
equipment (
➡
page 50).
≥
Timer programming has to be done on the external equipment and
switch to the timer recording standby mode. Refer to the
equipment’s operating instructions.
≥
Press [HDD] or [DVD] to select the drive.
Press [EXT LINK].
The unit turns off and switches to the recording standby mode.
≥
Recording begins when a signal is received from the connected
equipment.
≥
As long as a video picture is being transmitted by the external
equipment, the unit will record it.
When the right message appears on the
television screen, press [
2
,
1
] to select
“Yes” (continue recording the current
programme) or “Cancel” (cancel
recording) and press [ENTER].
[Note]
It is not possible to use EXT LINK function for timer recording of
RGB signals from Sky Digital STB (
➡
left, To record programmes
from satellite receiver by RGB signals).
Change the settings in the SETUP menu as follows (
➡
page 50).
–“AV2 Input”: “Video”
–“AV2 Connection”: “Normal”
–“Ext Link”: “Ext Link 1”
≥
Make sure you connect to the “VCR Scart terminal” of a Sky Digital
STB with a 21-pin Scart lead.
To cancel the external control
Press [EXT LINK] to stop recording or to cancel linked timer
recording standby.
≥
You can also press and hold [
∫
] on the main unit for more than 3
seconds to stop recording.
≥
In order to prevent accidental operation, press [EXT LINK] to
cancel the setting after recording is finished.
For your reference
≥
The video being recorded automatically appears on the television
when connected to this unit’s AV1 terminal with the 21-pin Scart
lead.
≥
This function does not work with some equipment. Refer to the
equipment’s operating instructions.
≥
The beginnings of recordings may not be recorded correctly in
some cases.
≥
When “Ext Link” is set to “Ext Link 2”, this function does not work if
the input signal is NTSC system.
To record programmes from satellite
receiver by RGB signals
Check, change or delete a programme
TIMER
RECORDING
12:56:00 15. 7. TUE
SELECT
ENTER
RETURN
Press ENTER to store
new programme.
1:58 SP
DVD
30:24 SP
Remain HDD
Mode
Disc
space
Stop
Start
No.
Name
Date
12:55:00 15. 7. TUE
PDC
HDD
DVD
New Timer Programme
Message displayed in the “Disc space” line
OK:
Displayed if the recording can fit in the
remaining space.
>
(Date): For recordings made daily or weekly, the display
will show until when recordings can be made (up
to a maximum of one month from the present
time) based on the time remaining on the disc.
!:
It may not be possible to record because:
≥
there is not enough space left
≥
the number of possible titles has reached its
maximum.
Relief:
Timer programmes that will be relief recorded to
the HDD.
Icons
[
This programme is currently recording.
W
The times overlap those in another programme.
Recording of the programme with the later start time
starts when the earlier programme finishes recording.
F
The disc was full so the programme failed to record.
The material was copy-protected so it was not recorded.
X
The programme did not complete recording because the
disc is dirty or some other reason.
Timer programmes set to Auto Renewal Recording
(
➡
page 26).
Titles that have been rerouted to the HDD
(Displayed while recording.)
Recording drive: HDD
Recording drive: DVD
Linked timer recordings with external
equipment (EXT LINK)
To record programmes from a satellite receiver
using the “Sky Personal Planner” function
Yes
Cancel
DVD now recording this programme.
ENTER
RETURN
HT1500_EB.book 27 ページ ２００４年５月２８日 金曜日 午後１時４１分
