6
RQT7621
INT
R
O
STEP
1
Front and surround speaker assembly
Preparation
≥
To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥
For assembly, use a Phillips-head screwdriver.
1
Thread the speaker cable through the base.
≥
For quicker threading, fold the cable lightly in half (do not
crease), pass the folded portion through the hole in the base,
and then pull through the rest of the cable.
2
Insert the pipe.
3
Secure the pipe to the base.
Ensure the screw is securely fastened.
≥
There is no difference between the right and left speakers and stands.
≥
Using the polyfoam and packaging cover included with this unit may ease attachment.
1
Remove the mounting plate screw, and remove plate B.
2
Place the pipe on plate A and attach plate B.
Rotate the pipe so that the flat side is facing away from the back
of the speaker.
3
Secure the plate with the same screw removed in
procedure
1
.
1
Attach the pipe to the large base.
Supplied Accessories
∏
Front speaker units
∏
Pipes
Make sure you have all the
indicated components before
assembly, setup, and
connection.
∏
Large bases
∏
Washer screws
∏
Surround speaker units
Thread the speaker
cable through here.
Cable
Hole for screw
Groove
1
2
Insert the pipe while gently pulling on the speaker cable.
Lessen excess
speaker cable.
The supplied stands are specially designed for
attachment to Panasonic SB-FS1501 front speakers
and SB-PS1501 surround speakers.
Only use as indicated in this setup.
Cable
Rear side of base
Washer screw
2
Attach the stands to the front and surround speakers.
2
1
3
Mounting plate screw
Speaker
Plate B
Polyfoam
Packaging
cover
Plate B
Plate A
[Note[
The stands with
longer cables are
for the surround
speakers.
Fit the offset into the slot
and slide plate B into the locked position.
Plate B
Offset
Slot
Align the surface of plate B so that it
is even with the pipe surface.
Plate B
Plate A
Pipe
HT1500_EB.book 6 ページ ２００４年５月２８日 金曜日 午後１時４１分
