R
A
DIO &
S
OUND
51
RQT
7
0
6
2
This mode is useful if you have to place your
surround speakers near the front speakers due
to the layout of your room.
This mode makes it seem like the sound from
the surround speakers is coming from behind
you.
Press and hold [SHIFT]
r
[MULTI REAR] for
more than 5 seconds.
Each time you do this:
V.R.S ON
!)
V.R.S OFF
This mode makes it seem like sound is coming
from multiple rear surround speakers virtually
when connected with surround speakers.
Press [SHIFT]
r
[MULTI REAR].
Each time you do this:
M.R.S ON
!)
M.R.S OFF
Using this function makes you feel like you are
sitting in the ideal seating position (in the center of
the circle formed by the speakers), even if you
cannot due to the layout of your room.
1
Press
[SHIFT]
r
[S.POSITION].
2
While “SEAT POSITION” is displayed
Press [
3
,
4
,
2
,
1
] to select a
position.
To cancel
Press [SHIFT]
r
[S.POSITION] again.
[Note]
While Virtual Rear Surround is on, the seat position is changed in
three horizontal steps.
Press [S W.LEVEL].
Each time you press the button:
SUB W 1
>
SUB W 2
>
SUB W 3
>
SUB W 4 (factory preset)
^-------------------------------------------------------------}
Adjust the level of the speakers so they are the same apparent level
as the front speakers where you would normally be sitting and
listening.
Preparation
Press [DVD] to select “DVD/CD” as the source.
1 Press [SHIFT]
r
[TEST] to output a test signal.
Lch: Front left
Cch: Center
Rch: Front right
RSch: Right surround
LSch: Left surround
2 Press [VOLUME
r
] or [
s
] to set the volume level normally
used for listening.
3 Press [
3
] (to increase) or [
4
] (to decrease).
L, R: (
➡
below, Balance)
C, RS, LS:
j
6 dB to
i
6 dB
To stop the test signal, press [SHIFT]
r
[TEST] again.
∫
To adjust speaker level during play
1 Press [SHIFT]
r
[CH SELECT] to select the speaker.
L
R
>
Cch
>
RSch
>
LSch
>
SWch
^---------------------------------------------------}
SW: Subwoofer
≥
You can only adjust SW if there is output from the subwoofer
channel.
2 Press [
3
] (to increase) or [
4
] (to decrease).
L, R: (
➡
below, Balance)
C, RS, LS:
j
6 dB to
i
6 dB
SW:
j
6 dB to
i
6 dB
You can adjust the balance of the front speakers.
1 Press [SHIFT]
r
[TEST] to select “Lch” or “Rch”.
Or
Press [SHIFT]
r
[CH SELECT] to select “L
R”.
2 Press [
2
,
1
] to adjust the “L”, “R” balance.
Virtual Rear Surround
Multi Rear Surround
Seat Position
Virtual speakers
V.REAR
Virtual speakers
M.
V.
REAR
Adjusting the bass
Speaker level adjustments
Balance
7062en.book 51 ページ ２００３年８月２７日 水曜日 午後２時５６分
