INT
R
O
16
RQT
7
0
6
2
Connections using Video cable (supplied) or S-Video cable (not supplied)
A
AC IN
RF OUT
RF IN
EXT LOOP
75
OUT
AV4 IN
R-AUDIO-L
R-AUDIO-L
VIDEO
OPTICAL
IN
AM ANT
FM ANT
S-VIDEO
LOOP
ANT
GND
VIDEO S-VIDEO
AV1 (TV)
AV2 (DECODER/EXT)
Aerial
(not supplied)
Aerial Input
socket
VIDEO
Input socket
Television with S-VIDEO
Input socket
(not supplied)
Video cable (supplied)
RF lead
(supplied)
RF Output
socket
RF Input socket
VIDEO
Output socket
S-VIDEO Output socket
S-Video cable
(not supplied)
S-VIDEO
Input socket
Recording from Set Top Boxes (STB) or other Satellite Receivers (SAT)
∫
Recording video signal by “Sky Personal
Planner” and “External Link 1” Functions
To record programmes from satellite receiver using “Sky Personal
Planner” function together with the “External Link1” function of this unit:
≥
Make connections as shown below.
≥
Change the AV1/AV2 settings in Connection menu as follows (
➜
page 53).
–“AV2 Input” set to “Video”
–“AV2 Connection” set to “Ext Link 1”
–“AV1 Output” set to “RGB”, “S-Video” or “Video” to suit the AV
terminal of your television.
≥
Set up Personal Planner programmes as required.
≥
Press [EXT. LINK] on this unit.
“External Link1” function can only be
used with the “Sky Personal Planner”
function for timer recording of video
signal from the “VCR Scart” terminal of
the Sky Digital Set Top Box.
∫
Recording RGB Signals
Most satellite receivers are capable of outputting RGB signals for
viewing on television through a scart terminal (called “TV Scart” on a
Sky Digital STB).
In the case of a Sky Digital STB, recording of RGB signals from the “TV
Scart” terminals is possible, but the “Sky Personal Planner” function for timer
recording cannot be used in conjunction with the “External Link1”
function of this unit.
To record programmes by RGB signals:
≥
Make connections as shown below.
≥
Set your Sky Digital STB to output “RGB” signals.
≥
Change the settings in the SETUP menu as follows (
➜
page 53).
–“AV2 Input” set to “RGB” (PAL only)
–“AV2 Connection” set to “NORMAL”
–“AV1 Output” set to “RGB”, “S-Video” or “Video” to suit the AV
terminal of your television.
≥
Set up Personal Planner programmes as required.
≥
Follow the steps for setting up timer programming.
After setting Personal Planner
programmes as required, Sky Digital
STB must be left on (not set to
standby) to ensure continuous output
of RGB signals.
It is not possible to use the “External
Link 1” function of this unit for timer
recording of RGB signals from the Sky
Digital STB.
The conventional video sockets of this unit’s output (input) a combination of the luminance signal (Y) and colour signal (C) which are recorded
on the disc. The S (Separate)-VIDEO socket allows separate transmission of signals in order to obtain clearer pictures.
The connection with S-Video cable can also be used for playback of any disc. The “S” in the “S-VIDEO socket” stands for “SEPARATED Y/C” not for “S-VHS”.
This unit
STB/SAT
AV
TV
AV2
AV1
VCR Scart
This unit
STB/SAT
AV
TV
AV2
AV1
TV Scart
C
STEP
4
Video connections
7062en.book 16 ページ ２００３年８月２７日 水曜日 午後２時５６分
