E
D
IT
ING
45
RQT
7
0
6
2
[RAM]
5
Press [ENTER] at the start point of the
section you want to erase.
6
Press [ENTER] at the end point of the
section you want to erase.
To continue using Partial Erase
1
Press [
3
,
4
] to select “Next” and press [ENTER], then press [
2
]
to select “Erase” and press [ENTER].
2
Repeat steps 5 and 6.
7
Press [
3
,
4
] to select “Exit” and
press [ENTER].
8
Press [
2
] to select “Erase” and press
[ENTER].
The partial segment you indicated above is erased.
[Note]
≥
You can use basic functions like search and slow-motion
(
➡
page 31).
≥
Play pauses if the end of the programme is reached during this
procedure.
≥
You cannot specify an end point before a start point.
≥
You may not be able to specify points within 3 seconds of each
other.
≥
You cannot specify points on still pictures in the programme.
≥
The disc’s available recording time may not increase after erasing
short segments.
[RAM]
Select a point at which to divide the programme into two.
5
Press [ENTER] at the point you want
to divide the programme.
To confirm the division point
Press [
3
,
4
] to select “Preview” and press [ENTER]. (Play
will begin from a point 10 seconds prior to and after the
division point.)
To change the division point
Restart play and press [
3
,
4
] to select “Divide”, then press
[ENTER] at the point you want to change.
6
Press [
3
,
4
] to select “Exit” and
press [ENTER].
7
Press [
2
] to select “Divide” and press
[ENTER].
The programme is divided.
[Note]
≥
You can use basic functions like search and slow-motion
(
➡
page 31).
≥
The divided programmes retain the title and CPRM property
(
➡
page 66) of the original programme.
≥
A very small portion of the recording preceding the division point
may be lost.
≥
It is not possible to carry out Divide in the following cases:
–when the programme is extremely short.
–when the total number of programmes is more than 99.
Partial Erase
Partial
Erase
0 : 00 . 01
Start
– : – – . – –
End
3
Start
End
Next
Exit
0 : 00 . 01
PLAY
03
RETURN
ENTER
SELECT
N
S
0 : 00 . 01
Start
End
3
Start
End
Next
Exit
0 : 10 . 15
RETURN
ENTER
SELECT
0 : 10 . 15
N
S
Partial
Erase
03
3
Divide
Divide
Programme
Divide
3
Preview
Divide
Exit
0 : 00 . 01
0 : 00 . 01
03
RETURN
ENTER
SELECT
N
S
7062en.book 45 ページ ２００３年８月２７日 水曜日 午後２時５６分
