Panasonic S-Link FP2, Руководство пользователя

Страница: 54 / 82

Operation
FP2 S − LINK Unit
5 − 14
5.4 S − LINK I/O Device Address Recognition
2. Check to see which segments of the I/O display on the
front of the unit are lighted.
Based on the below table, the on/off status of addresses can be
confirmed in units of eight points.
When MONITOR switch is set to [8],
addresses 64 to 71 are displayed
As shown in the table below, eight addresses are assigned to each numeric value on the
MONITOR switch, in sequential order. Select the numeric value that includes the
address to be confirmed.
[Displayed Addresses]
I/O
indicator
MONITOR switch
indicator 0
1 2 3 4 5 6 7 8 9 A B C D E F
0 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
1 1 9 17 25 33 41 49 57 65 73 81 89 97 105 113 121
2 2 10 18 26 34 42 50 58 66 74 82 90 98 106 114 122
3 3 11 19 27 35 43 51 59 67 75 83 91 99 107 115 123
4 4 12 20 28 36 44 52 60 68 76 84 92 100 108 116 124
5 5 13 21 29 37 45 53 61 69 77 85 93 101 109 117 125
6 6 14 22 30 38 46 54 62 70 78 86 94 102 110 118 126
7 7 15 23 31 39 47 55 63 71 79 87 95 103 111 119 127
Note
If you display a non − existent unit address (one that is greater
than the total number of I/O points selected with the I/O setting
switch), an arbitrary number appears.