Panasonic S-Link FP2, Руководство пользователя

Страница: 27 / 82

FP2 S − LINK Unit I/O Assignments
3 − 3
3.1 An Overview of I/O Assignments
3.1 An Overview of I/O Assignments
The S − LINK unit, like other I/O units, is used by assigning inputs (X) and outputs (Y).
The inputs/outputs on the FP2 side that result from these assignments are treated as
corresponding to the I/O addresses (S − LINK I/O devices) in the S − LINK.
Example:
The illustration below shows an example of the relationship
between the addresses in the S − LINK I/O device and the
addresses assigned to the S − LINK unit.
X10, X11 −−− X2E, X2F
Addresses 0, 1 −−− 30, 31
16 − point input unit
I/O setting switch (MODE ) is set to “4”
Y30, 31 −−− Y4E, Y4F
Addresses 32, 33 −−− 62, 63
32 output points
32 input points
X10 to X2F
Y30 to Y4F
Contents of the illustration: Power supply unit, standard CPU,
16 − point input unit, S − LINK unit installed beside these. I/O
numbers assigned to the S − LINK unit are X10 to X 2F (32
points) and Y30 to Y4F (32 points). Addresses on the S − LINK
are input (0 to 31) and output (32 to 63).
Notes
•
Setting contents selected with the I/O setting switch are read
only the one time, when the power supply to the FP2 is turned
on.
•
For detailed information pertaining to the S − LINK, refer to the
“S − LINK Construction Manual.”