Panasonic PT-RZ470 Series, Руководство по обслуживанию

Страница: 60 / 84

ADJ - 6
6. Select the save place and click the [Save(S)] button.
7. When the progress bar reaches the right-side end, and "READ/WRITE button" returns to normal display from grayed out,
save of data is complete. Select "File"
→
"Quit", and please be finished.
1. 3. 4. Restore the Backup EEPROM data (After circuit board exchange)
1. Switch the projector to "Normal-Standby" mode (POWER indicator is Lighting in red).
2. Start up service software
［
DataLogBackup.exe
］
with a computer.
3. Select "Option "
→
"Setting" and set Serial Port of the computer, Baud Rate and Parity.
4. Select a model number and ID.
6. Select the file and click the [OPEN(O)] button.
7. When the progress bar reaches the right-side end, and "READ/WRITE button" returns to normal display from grayed out,
write of data is complete. Select "File"
→
"Quit", and please be finished.
8. If the restoration of data is completed, turn the MAIN POWER off then MAIN POWER on.
5. 1) Select "Backup" (an EEPROM).
2) Checkmark in "REPLACE A-PWB" of "COPY MODE".
3) Click an [WRITE EEPROM] button.
①
②
③