Panasonic PT-RZ21K Скачать руководство пользователя страница 220

Страница: 220 / 262

Chapter 6

Maintenance — Maintenance

220 - ENGLISH

Maintenance

Before maintenance

Make sure to turn off the power before performing the maintenance of the projector.

When switching off the projector, make sure to follow the procedures in “Switching off the projector”

(

page 69).

Maintenance

Outer case

Wipe off dirt and dust with a soft, dry cloth.

If the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry off the projector with

a dry cloth.

Do not use benzene, thinner, or rubbing alcohol, other solvents, or household cleaners. Doing so may

deteriorate the outer case.

When using chemically treated dust cloths, follow the instructions written on its packaging.

Lens front surface

Wipe off dirt and dust from the front surface of the lens with a soft clean cloth.

Do not use a cloth that is fluffy, dusty, or soaked with oil/water.

Since the lens is fragile, do not use excessive force when wiping the lens.

Attention

The lens is made of glass. Impacts or excessive force when wiping may scratch its surface. Handle with care.

Note

Dust may accumulate around the air intake port depending on the environment or usage conditions such as when using the projector in a

dusty place. If the projector is used in such environment, the circulation of ventilation, cooling, and heat exhaust may weaken, causing the

luminance to dimmer.

Содержание PT-RZ21K







































































































































































































































































Результаты поиска

Содержание PT-RZ21K

Отзывы:

Panasonic PT-RZ21K, Руководство по эксплуатации, Страница: 220 / 262

Результаты поиска

Содержание PT-RZ21K

Отзывы: