Panasonic PT-RZ21K, Руководство по эксплуатации, Страница: 160 / 262

Chapter 4 Settings — [PROJECTOR SETUP] menu
160 - ENGLISH
Interrelation of luminance and runtime
The projector can be operated at arbitrary brightness and duration of use by combining the settings of [MAX
LIGHT OUTPUT LEVEL], [LIGHT OUTPUT], and [CONSTANT MODE] in [BRIGHTNESS CONTROL SETUP].
Interrelation of luminance and runtime is as follows. Make the settings depending on your desired duration of use
and brightness of the projected image.
Values of the luminance and runtime are rough estimations.
r
To set the projector based on the duration of use
Duration of use
(hour)
When [CONSTANT MODE] is set to [OFF] When [CONSTANT MODE] is set to [AUTO] or [PC]
[MAX LIGHT
OUTPUT LEVEL]
(%)
[LIGHT OUTPUT]
(%)
Luminance (lm)
[MAX LIGHT
OUTPUT LEVEL]
(%)
[LIGHT OUTPUT]
(%)
Luminance (lm)
20 000
100.0 100.0 20 000 100.0 71.6 14 300
24 000 100.0 100.0 20 000 100.0 68.3 13 600
27 000 100.0 88.4 17 600 100.0 65.9 13 100
31 000 100.0 74.9 14 900 100.0 63.0 12 600
35 000 100.0 64.3 12 800 100.0 60.3 12 000
40 000
― ― ― 100.0 57.2 11 400
r
To set the projector based on luminance
Luminance (lm)
When [CONSTANT MODE] is set to [OFF] When [CONSTANT MODE] is set to [AUTO] or [PC]
[MAX LIGHT
OUTPUT LEVEL]
(%)
[LIGHT OUTPUT]
(%)
Runtime (hour)
[MAX LIGHT
OUTPUT LEVEL]
(%)
[LIGHT OUTPUT]
(%)
Runtime (hour)
20 000
100.0 100.0 24 290 ― ― ―
18 000 100.0 90.0 26 600 100.0 90.0 2 490
16 000 100.0 80.0 29 370 100.0 80.0 11 180
14 000 100.0 70.0 32 730 100.0 70.0 21 860
12 000 100.0 60.0 36 900 100.0 60.0 35 520
10 000
― ― ― 100.0 50.0 53 740
8 000 ― ― ― 100.0 40.0 79 390
6 000 ― ― ― 100.0 30.0 118 060
4 000 ― ― ― 100.0 20.0 182 260
Note
f
Under influence of characteristics of each light source, conditions of use, installation environment, etc., the runtime may be shorter than the
estimation.
f
The duration of use is referred to as the runtime when you use the projector successively. The duration of use is an estimated duration and
is not the warranty period.
f
If the consolidated runtime of the projector exceeds 20 000 hours, replacement of the components inside the projector may be required. The
consolidated runtime can be confirmed in the [STATUS] screen. Refer to the [PROJECTOR SETUP] menu → [STATUS] for details.
[LIGHT OUTPUT]
Adjust the brightness of light source.
The setting is reflected when it is already set with “Initial setting (operation setting)” (
x
page 63) in the [INITIAL
SETTING] screen or with the [PROJECTOR SETUP] menu → [OPERATION SETTING]. The [LIGHT OUTPUT]
setting is synchronized with the [PROJECTOR SETUP] menu → [OPERATION SETTING] → [LIGHT OUTPUT].
The most recent setting is reflected in both items.
1) Press
as
to select [LIGHT OUTPUT].
2) Press
qw
to adjust.
Operation
Adjustment
Range of adjustment
Brightness Runtime
Press
w
. The screen becomes brighter. The runtime becomes shorter.
8.0 % - 100.0 %
Press
q
. The screen becomes darker. The runtime becomes longer.