Panasonic PT-RZ21K, Руководство по эксплуатации

Страница: 173 / 262

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 173
1) Press
as
to select [REMOTE2 MODE].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[DEFAULT] Uses pin assignment of the <REMOTE 2 IN> terminal in standard setting. (
x
page 241)
[USER] Changes the setting of the <REMOTE 2 IN> terminal.
f
When [USER] is selected, proceed to Step 3) .
3) Press the <ENTER> button.
4) Press
as
to select one from [PIN2] to [PIN8], and press
qw
to switch the setting.
[FUNCTION BUTTON]
Set the function of the <FUNCTION> button on the remote control.
1) Press
as
to select [FUNCTION BUTTON].
2) Press the <ENTER> button.
f
The
[FUNCTION BUTTON]
screen is displayed.
3) Press
as
to select a function.
[DISABLE] Disables the <FUNCTION> button.
[P IN P]
Switches the [P IN P] setting ([OFF], [USER1], [USER2], or [USER3]). (
x
page 178)
[SUB MEMORY]
Displays the sub memory list. (
x
page 183)
[SYSTEM SELECTOR]
Switches the [SYSTEM SELECTOR] setting according to the input signal of the image being
projected.
f
When the input signal is anything other than SDI1 input or SDI2 input
The [PICTURE] menu
→ [SYSTEM SELECTOR] (
x
page 98)
f
When the input signal is SDI1 input or SDI2 input
g
The [DISPLAY OPTION] menu → [SDI IN] → [SINGLE LINK SETTING] → [SDI1]/[SDI2] →
[SYSTEM SELECTOR] (
x
page 134)
g
The [DISPLAY OPTION] menu → [SDI IN] → [DUAL LINK SETTING] → [SYSTEM SELECTOR]
(
x
page 134)
[SYSTEM DAYLIGHT VIEW]
Switches the [SYSTEM DAYLIGHT VIEW] setting. (
x
page 95)
[FREEZE] Temporarily pauses the image. (
x
page 142)
[WAVEFORM MONITOR] Displays the waveform of the input signal. (
x
page 142)
[LENS MEMORY LOAD]
Loads the registered lens memory. (
x
page 148)
[LEFT/RIGHT SWAP]
Switches the [LEFT/RIGHT SWAP] setting. (
x
page 118)
[PROJECTION METHOD] Switches the [PROJECTION METHOD] setting. (
x
page 145)
4) Press the <ENTER> button.
[STATUS]
Display the status of the projector.
1) Press
as
to select [STATUS].
2) Press the <ENTER> button.
f
The [STATUS] screen is displayed.
3) Press
qw
to switch the pages.
f
The page will change each time you press the button.
[PROJECTOR TYPE] Displays the type of the projector.
[SERIAL NUMBER] Displays the serial number of the projector.
[PROJECTOR RUNTIME] Displays the runtime of the projector.
[LIGHT RUNTIME] Displays the runtime of the light source 1 and the light source 2.
[CONTINUOUS LIGHTING
TIME]
Displays the elapsed time from when the light source is illuminated.
The elapsed time after the illumination of the light source can be confirmed when adjusting the focus.
The elapsed time is reset when the light source is temporarily turned off such as using the shutter
function.