Panasonic PT-RZ21K, Руководство по эксплуатации

Страница: 155 / 262

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 155
20) Press
qw
to select [NEXT], and press the <ENTER> button.
f
The [SETUP ASSISTANT] screen (page 5/8) is displayed.
f
It will return to previous screen by selecting [BACK] and pressing the <ENTER> button.
21) Press
asqw
to select [FOCUS POSITION].
22) Press the
qw
button to adjust the focus.
23) Press
asqw
to select [NEXT], and press the <ENTER> button.
f
The [SETUP ASSISTANT] screen (page 6/8) is displayed.
24) Press
asqw
to select [TEST PATTERN].
25) Press
qw
to select [EXTERNAL].
f
The items will switch each time you press the button.
[INTERNAL] Select this item when using the internal test pattern for focus adjustment.
[EXTERNAL]
Uses the input image from the external device for focus adjustment. If the level of [Brightness of
the image] exceeds the specified value, [NEXT] cannot be selected. When the dark image with a
brightness level indicated in the menu screen (OSD) or lower is input, [NEXT] can be selected.
26) Press
asqw
to select [NEXT], and press the <ENTER> button.
f
The [SETUP ASSISTANT] screen (page 7/8) is displayed.
f
It will return to previous screen by selecting [BACK] and pressing the <ENTER> button.
27) Wait until [Waiting time] turns [0s].
f
Wait until the focus is stabilized.
f
When the [Waiting time] turns [0s], the [Please wait...] message disappears, and [NEXT] becomes
selectable.
28) Press
qw
to select [NEXT], and press the <ENTER> button.
f
The [SETUP ASSISTANT] screen (page 8/8) is displayed.
f
It will return to previous screen by selecting [BACK] and pressing the <ENTER> button.
29) Press
asqw
to select [FOCUS POSITION].
30) Press the
qw
button to adjust the focus.
31) Press
asqw
to select [STORE], and press the <ENTER> button.
f
[SETUP ASSISTANT] is completed, and the parameters for [FOCUS OFFSET BRIGHT] and [FOCUS
OFFSET DARK] are updated.
Note
f
When the parameters for [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] are set by executing [SETUP ASSISTANT], the
[PROJECTOR SETUP] menu → [LENS] → [ACTIVE FOCUS OPTIMIZER] → [ACTIVE FOCUS] will be set to [ON].
f
When [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] are set following the guidance of [SETUP ASSISTANT] with AC 100 V
to AC 120 V, use the projector with AC 100 V to AC 120 V. When the power supply is changed to AC 200 V to AC 240 V, reset the settings
using [SETUP ASSISTANT].
Directly setting the parameter
When using the projection lens where the optimal parameter at the time when combined with the projector is
already known, [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] parameters can be individually set
without executing [SETUP ASSISTANT].
1) Press
as
to select [LENS].
2) Press the <ENTER> button.
f
The [LENS] screen is displayed.
3) Press
as
to select [ACTIVE FOCUS OPTIMIZER].
4) Press the <ENTER> button.
f
The [ACTIVE FOCUS OPTIMIZER] screen is displayed.
5) Press
as
to select [FOCUS OFFSET SETUP].