Chapter 4
Settings — [PROJECTOR SETUP] menu
178 - ENGLISH
6) When the confirmation screen is displayed, press
qw
to select [OK], and press the <ENTER> button.
Note
f
The security password is the password set in the [SECURITY] menu
→
[SECURITY PASSWORD CHANGE].
Initial password of the factory default setting:
awsqawsq
f
The following settings are not initialized even if [ALL USER DATA] is executed.
g
The [DISPLAY OPTION] menu
→
[UNIFORMITY]
g
The [PROJECTOR SETUP] menu
→
[OPERATION SETTING]
→
[OPERATING MODE]
g
The [PROJECTOR SETUP] menu
→
[OPERATION SETTING]
→
[MAX LIGHT OUTPUT LEVEL]
g
The [PROJECTOR SETUP] menu
→
[STANDBY MODE]
g
The [PROJECTOR SETUP] menu
→
[LENS]
→
[ACTIVE FOCUS OPTIMIZER]
→
[FOCUS OFFSET BRIGHT] and [FOCUS OFFSET
DARK]
g
[FILTER TYPE] and [FILTER COUNTER] in the [PROJECTOR SETUP] menu
→
[FILTER SETTING]
f
When a projection lens equipped with EEPROM is attached, following setting will not return to factory default setting even if [ALL USER
DATA] is executed.
g
The [PROJECTOR SETUP] menu
→
[LENS]
→
[LENS TYPE]
g
The [PROJECTOR SETUP] menu
→
[LENS]
→
[LENS INFORMATION SETTING]
→
[LENS ID] and [LENS NAME]
f
To initialize the setting values of [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] in the [PROJECTOR SETUP] menu
→
[LENS]
→
[ACTIVE FOCUS OPTIMIZER], execute the [PROJECTOR SETUP] menu
→
[LENS]
→
[FOCUS OFFSET SETUP]
→
[INITIALIZE].
f
If [ALL USER DATA] is executed, the
[INITIAL SETTING]
screen is displayed when the projection is started the next time.
[SERVICE PASSWORD]
This function is used by a service person.
