Chapter 2
Getting Started — Attaching/removing the projection lens (optional)
ENGLISH - 51
2) Remove the projection lens by turning it counterclockwise while pressing the lens release button.
(Fig. 1)
f
Turn the projection lens counterclockwise until the mark on the projection lens (orange) is aligned with the
mark on the projector (
E
on the left side of LOCK).
f
when carrying or storing the projector.
3) Attach the supplied lens hole cover. (Fig. 2)
f
Insert the lens hole cover by aligning the mark on the lens hole cover (
E
) with the mark on the projector (
E
on the left side of LOCK) and turn clockwise until it clicks.
4) Secure the lens hole cover. (Fig. 3)
f
Use a Phillips screwdriver to tighten the screw fixing the lens hole cover.
Note
f
Some lenses may not have a screw hole to use to secure the projection lens.
Attention
f
Store the removed projection lens where it will be free from vibration and impact.
f
Store the removed lens fixing screw in a safe place.
