Panasonic PT-RCQ10, Руководство по эксплуатации, Страница: 145 / 267

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 145
7) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
[LIGHT OUTPUT] can be adjusted individually for each setting item of [OPERATING MODE].
f
The uniformity of the brightness between multiple displays can be maintained by adjusting [LIGHT OUTPUT] for each projector when
structuring a multi-display screen by combining the projected images from multiple projectors.
Relationship between brightness and runtime
When [OPERATING MODE] is set to [NORMAL], [USER1], [USER2], or [USER3], the projector can be operated
with arbitrary brightness and runtime by combining the settings of [MAX LIGHT OUTPUT LEVEL], [LIGHT
OUTPUT], and [CONSTANT MODE] in [BRIGHTNESS CONTROL SETUP].
The relationship between the [LIGHT OUTPUT] setting, brightness, and the estimated runtime is as follows. Make
the setting depending on the desired brightness of the projected image and runtime.
The values of the brightness and the runtime are just an estimate, and the graph indicating the relationship is just
an example. Also, these do not indicate the warranty period.
r
PT-RCQ10
f
When [CONSTANT MODE] is set to [OFF]
[LIGHT OUTPUT] (%) Brightness (lm) Estimated runtime
*1
(hours)
100.0 10 000 20 000
78.2 7 800 27 000
58.5 5 800 34 000
50.0 5 000 37 000
*1 Estimated runtime is the time until the brightness decreases to approximately half of the time of delivery when the projector is used with the
[PICTURE] menu → [DYNAMIC CONTRAST] set to [3] and under environment of 0.15 mg/m
3
dust.
[LIGHT OUTPUT] (%)
Brightness (lm)
Estimated runtime (hours)
20 000
50.0
70.0
90.0
40.0
60.0
80.0
100.0
26 800 30 200 33 600 23 400 37 000
10 000
5 000
f
When [CONSTANT MODE] is set to [AUTO] or [PC]
[LIGHT OUTPUT] (%) Brightness (lm) Estimated runtime
*1
(hours)
64.6 6 400 20 000
60.5 6 000 24 000
57.7 5 700 27 000
54.3 5 400 31 000
51.1 5 100 35 000
47.5 4 700 40 000
*1 Estimated runtime is the time the brightness is maintained constant when the projector is used with the [PICTURE] menu → [DYNAMIC
CONTRAST] is set to [3], and under environment of 0.15 mg/m
3
dust. The brightness will gradually decrease after exceeding this time.
Brightness
Image of brightness change over time
Start of use Estimated runtime
Hours
[LIGHT OUTPUT] (%)
Estimated runtime (hours)
20 000
40.0
60.0
80.0
50.0
70.0
90.0
100.0
24 000 28 000 32 000 36 000 40 000
4 700
6 400
Brightness (lm)
10 000