Panasonic PT-RCQ10, Руководство по эксплуатации, Страница: 122 / 267

Chapter 4 Settings — [DISPLAY OPTION] menu
122 - ENGLISH
4) Press the <ENTER> button.
f
The
[DVI-D EDID MODE]
screen is displayed.
5) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[DEFAULT] Standard setting.
[USER] Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items as EDID.
f
Proceed to Step 10) when [DEFAULT] is selected.
6) Press the <ENTER> button.
f
The [RESOLUTION] screen is displayed.
7) Press
asqw
to select [RESOLUTION].
f
Select [1024x768p], [1280x720p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p], [1440x900p],
[1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i], or [1920x1200p].
8) Press the <ENTER> button.
f
The [VERTICAL SCAN FREQUENCY] screen is displayed.
9) Press
qw
to select [VERTICAL SCAN FREQUENCY].
f
Select [60Hz], [50Hz], [30Hz], [25Hz], or [24Hz] when [1920x1080p] is selected for [RESOLUTION].
f
Select [60Hz], [50Hz], or [48Hz] when [1920x1080i] is selected for [RESOLUTION].
f
Select [60Hz] or [50Hz] when anything other than following is selected for [RESOLUTION].
g
[1920x1080p], [1920x1080i]
10) Press the <ENTER> button.
f
The confirmation screen is displayed.
11) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
The setting details are displayed in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] of [EDID STATUS].
f
Setting of the resolution and the vertical scanning frequency may be necessary on the computer or video device in use.
f
The computer, video device, or projector in use may require the power to be turned off and on again after configuring settings.
f
The output with the set resolution or vertical scanning frequency may not be possible depending on the computer or video device in use.
[SDI IN]
Set this item in accordance with the signal input to the <SDI IN> terminal.
Setting [RESOLUTION]
1) Press
as
to select [SDI IN].
2) Press the <ENTER> button.
f
The [SDI IN] screen is displayed.
3) Press
as
to select [RESOLUTION], and press the <ENTER> button.
f
The [RESOLUTION] screen is displayed.
4) Press
as
to select the item, and press the <ENTER> button.
f
Select [AUTO], [1280x720p], [1920x1080i], [1920x1080p], [1920x1080sF], or [2048x1080p].
Setting [3G-SDI MAPPING]
1) Press
as
to select [SDI IN].
2) Press the <ENTER> button.
f
The [SDI IN] screen is displayed.
3) Press
as
to select [3G-SDI MAPPING].