Panasonic PT-RCQ10, Руководство по эксплуатации, Страница: 128 / 267

Chapter 4 Settings — [DISPLAY OPTION] menu
128 - ENGLISH
2) Press the <ENTER> button.
f
The
[SLOT IN]
screen is displayed.
3) Press
as
to select [EDID MODE] of the corresponding input.
4) Press the <ENTER> button.
f
The [DVI-D EDID MODE] screen is displayed.
5) Press
qw
to switch [EDID MODE].
f
The items will switch each time you press the button.
[DEFAULT] Standard setting.
[USER] Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items as EDID.
f
Proceed to Step 10) when [DEFAULT] is selected.
6) Press the <ENTER> button.
f
The [RESOLUTION] screen is displayed.
7) Press
asqw
to select [RESOLUTION].
f
Select [1024x768p], [1280x720p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p], [1440x900p],
[1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i], or [1920x1200p].
8) Press the <ENTER> button.
f
The [VERTICAL SCAN FREQUENCY] screen is displayed.
9) Press
qw
to select [VERTICAL SCAN FREQUENCY].
f
Select [60Hz], [50Hz], [30Hz], [25Hz], or [24Hz] when [1920x1080p] is selected for [RESOLUTION].
f
Select [60Hz], [50Hz], or [48Hz] when [1920x1080i] is selected for [RESOLUTION].
f
Select [60Hz] or [50Hz] when anything other than following is selected for [RESOLUTION].
g
[1920x1080p], [1920x1080i]
10) Press the <ENTER> button.
f
The confirmation screen is displayed.
11) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
The settings in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] are displayed in [EDID STATUS].
f
Setting of the resolution and the vertical scanning frequency may be necessary on the computer or video device in use.
f
The computer, video device, or projector in use may require the power to be turned off and on again after configuring settings.
f
The output with the set resolution or vertical scanning frequency may not be possible depending on the computer or video device in use.
When the optional Interface Board for DisplayPort 2 input (Model No.: ET-MDNDP10) is installed
Setting [SIGNAL LEVEL] in [SLOT IN] (DisplayPort input)
1) Press
as
to select [SLOT IN].
2) Press the <ENTER> button.
f
The [SLOT IN] screen is displayed.
3) Press
as
to select [SIGNAL LEVEL] of the corresponding input.
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO] Automatically sets the signal level.
[64-940]
Select this item when the signal output from the HDMI terminal of the external device (such as a Blu-
ray disc player) is input to the <DisplayPort IN 1> terminal or the <DisplayPort IN 2> terminal using a
conversion cable, etc.
[0-1023]
Select this item when the signal output from the DisplayPort terminal of the external device (such as a
computer) is input to the <DisplayPort IN 1> terminal or the <DisplayPort IN 2> terminal.
Select this item also when the signal output from the HDMI terminal of a computer, etc., is input to the
<DisplayPort IN 1> terminal or the <DisplayPort IN 2> terminal using a conversion cable, etc.