Panasonic PT-RCQ10 Скачать руководство пользователя страница 139

Страница: 139 / 267

Chapter 4

Settings — [DISPLAY OPTION] menu

ENGLISH - 139

The shutter function of the projector with [MODE] set to [SUB] can be operated individually. At that time, the shutter operation will follow the

setting of the [DISPLAY OPTION] menu

→

[SHUTTER SETTING] set in that projector.

[FREEZE]

Stop the projected image temporarily regardless of the playback of the external device.

1) Press

to select [FREEZE].

2) Press the <ENTER> button.

Press the <MENU> button to release.

Note

[FREEZE] is displayed on the screen when video is paused.

[WAVEFORM MONITOR]

Use the input signals from a connected external device to display in a waveform. Check whether video output

(luminance) signal level is within the recommended range for the projector and adjust.

1) Press

to select [WAVEFORM MONITOR].

2) Press

to switch the item.

[OFF]

Does not display the waveform monitor.

[ON]

Displays the waveform monitor.

3) Press the <MENU> button two times to clear.
4) Press

to select any horizontal line.

Press the <ENTER> button to switch the Select line to either luminance, red, green, or blue.

Line selection items switch each time the <ENTER> is pressed only when the waveform monitor is

displayed.

“Select line (luminance)”

Displayed in white waveform.

“Select line (red)”

Displayed in red waveform.

“Select line (green)”

Displayed in green waveform.

“Select line (blue)”

Displayed in blue waveform.

Note

Setting is also available from the [PROJECTOR SETUP] menu

→

[FUNCTION BUTTON].

The waveform monitor is not displayed when on-screen display is hidden (off).

Adjusting the waveform

Project the luminance adjustment signal of a commercial test disk (0 % (0 IRE or 7.5 IRE) – 100 % (100 IRE)) and

adjust.

Signal level

Image displayable area

Image position

1) Select “Select line (luminance)” on the waveform monitor.
2) Adjust black level.

Adjust the black level 0 % of the video signal to the 0 % position of the waveform monitor using the

[PICTURE] menu

→

[BRIGHTNESS].

Содержание PT-RCQ10












































































































































































































































































Результаты поиска

Содержание PT-RCQ10

Отзывы:

Panasonic PT-RCQ10, Руководство по эксплуатации, Страница: 139 / 267

Результаты поиска

Содержание PT-RCQ10

Отзывы: