Panasonic PT-DZ13KU Скачать руководство пользователя страница 91

Страница: 91 / 187

Chapter 4

Settings — [3D SETTINGS] menu

ENGLISH - 91

[3D SETTINGS] menu

(Only for PT-DZ13KU, PT-DS12KU, PT-DW11KU)

On the menu screen, select [3D SETTINGS] from the main menu, and select an item from the

sub-menu.

Refer to “Navigating through the menu” (

page 65) for the operation of the menu screen.

After selecting the item, press

asqw

to set.

[3D SYSTEM SETTING]

Set a picture display method for use during 3D signal input as necessary for the 3D system in use.

1) Press

to select [3D SYSTEM SETTING].

2) Press

to switch the item.

The items will switch each time you press the button.

[SINGLE]

During 3D signal input, sequential frames of images for the right eye and images for the left eye are

alternately displayed.

[DUAL (LEFT)]

Only images for the left eye are displayed during 3D signal input.

[DUAL (RIGHT)]

Only images for the right eye are displayed during 3D signal input.

Note

When 2D images are input, 2D images are displayed regardless of [3D SYSTEM SETTING] settings.

[3D SYNC SETTING]

Set the way in which the <3D SYNC 1 IN/OUT> terminal and the <3D SYNC 2 OUT> terminal will be used.

Attention

Before connecting external devices to the <3D SYNC 1 IN/OUT> terminal and the <3D SYNC 2 OUT> terminal using cables, complete the

[3D SYNC MODE] setting and confirm that the external devices to be connected are turned off.

Changing [3D SYNC MODE] while the cables are connected may result in malfunctions of the projector or the connected external devices.

1) Press

to select [3D SYNC SETTING].

2) Press the <ENTER> button.

The precaution message related to [3D SYNC SETTING] is displayed.

3) Press the <ENTER> button.

The

[3D SYNC SETTING]

screen is displayed.

4) Press

to select [3D SYNC MODE].

5) Press

to switch the item.

[3D SYNC MODE]

Items set in [3D SYNC1]

Items set in [3D SYNC2]

[OFF]

Not used.

[1]

3D trigger output

Stereo synch output

[2]

3D trigger output

[3]

Stereo synch input

Through 3D SYNC1

[4]

Stereo synch input

Stereo synch output

[5]

Stereo synch input

3D trigger output

[6]

Frame synch input

Through 3D SYNC1

[7]

Frame synch input

Stereo synch output

[8]

Frame synch input

3D trigger output

[9]

3D trigger output

Frame synch output

Содержание PT-DZ13KU




























































































































































































Результаты поиска

Содержание PT-DZ13KU

Отзывы:

Panasonic PT-DZ13KU, Руководство по эксплуатации, Страница: 91 / 187

Результаты поиска

Содержание PT-DZ13KU

Отзывы: