Panasonic PT-DZ13KU Скачать руководство пользователя страница 114

Страница: 114 / 187

Chapter 4

Settings — [PROJECTOR SETUP] menu

114 - ENGLISH

When [MODE] of [BRIGHTNESS CONTROL SETUP] is set to

[AUTO] and [LINK] is set from [GROUP A] to [GROUP D]

The screen shows the status of the brightness control of

synchronized projectors (up to eight units), including the projector

being controlled through the on-screen menu.

192. 168. 30. 2

192. 168. 30. 3
192. 168. 30. 4

LINK

UPDATE

PROJECTOR

GROUP A

PROJECTOR2
PROJECTOR3

BRIGHTNESS CONTROL STATUS

MENU SELECT

When [MODE] of [BRIGHTNESS CONTROL SETUP] is set to

[PC]

RETURN

MODE

PROJECTOR

BRIGHTNESS CONTROL STATUS

1  Display the name of the projector.
2  Display the synchronized group.
3  Display the IP address of the projector.
4  Display the names and IP addresses of projectors in same group detected over the network.
5  Display the status by color.

Green: There is an allowance for brightness correction.

Yellow: There is little allowance for brightness correction.

Red: There is a brightness control error.

6 Display error detailed messages.
7 Display error messages.

When the message [Failed to apply BRIGHTNESS CONTROL to some projectors.] appears, it means that synchronization with the

projector displayed in red has failed.

Press

to select the projector displayed in red, and press the <ENTER> button to display the error details.

8 Update to the latest status information.

Error details

Error message

Measures to take

[Exceed maximum number of

projectors.]

Limit the number of projectors in one group to eight.

When synchronizing nine or more projectors, use the dedicated software “Multi Projector

Monitoring & Control Software”

through a computer.

[Please check the COMMAND

CONTROL setting.]

Set [NETWORK CONTROL]

→

[COMMAND CONTROL] to [ON] for the projector in error.

Set [NETWORK CONTROL]

→

[COMMAND PORT] of all projectors to be linked to the same value.

[Please check the USER NAME

and PASSWORD in the COMMAND

CONTROL setting.]

Assign the same [User name] and [Password] strings that have web control administrator rights to

all projectors to be linked.

[Cannot apply BRIGHTNESS

CONTROL. Please check projector

status.]

The projector is in standby. Switch on the power.

[Brightness Sensor Error]

There is a problem with the brightness sensor. If problems persist even after switching on the

power, consult your dealer.

“Multi Projector Monitoring & Control Software” is included in the supplied CD-ROM.

Note

If the synchronized projectors are not displayed in the list, check the following:

Are there devices with the same IP address on the network?

Are the LAN cables connected correctly? (

page 136)

Are the subnets of the projectors the same?

Are the same [LINK] settings applied to a group?

Refer to [NETWORK SETUP] (

page 135) or “[Network config] page” (

page 143) on how to change the projector name.

Содержание PT-DZ13KU




























































































































































































Результаты поиска

Содержание PT-DZ13KU

Отзывы:

Похожие инструкции для PT-DZ13KU

Бренды по названию

Популярные бренды

Panasonic PT-DZ13KU, Руководство по эксплуатации

Результаты поиска

Содержание PT-DZ13KU

Отзывы:

Похожие инструкции для PT-DZ13KU

Бренды по названию

Популярные бренды