Chapter 4
Settings — [PROJECTOR SETUP] menu
ENGLISH - 121
f
When [USER] is selected, proceed to Step
3)
.
3) Press the <ENTER> button.
4) Press
as
to select one from [PIN2] to [PIN8], and press
qw
to switch the setting.
[FUNCTION BUTTON]
Set the functions of the <FUNC> button on the remote control.
1) Press
as
to select [FUNCTION BUTTON].
2) Press the <ENTER> button.
f
The
[FUNCTION BUTTON]
screen is displayed.
3) Press
as
to select a function.
[DISABLE]
Disables the <FUNC> button.
[P IN P]
Switches [OFF]/[USER1]/[USER2]/[USER3] in [P IN P]. (
x
page 125)
[SUB MEMORY]
Displays the sub memory list. (
x
page 130)
[SYSTEM SELECTOR]
Switches the [SYSTEM SELECTOR] setting. (
x
page 77)
[SYSTEM DAYLIGHT VIEW]
Switches the [SYSTEM DAYLIGHT VIEW] setting. (
x
page 75)
[FREEZE]
Temporarily pauses the image. (
x
page 105)
[WAVEFORM MONITOR]
Displays the waveform of the input signal. (
x
page 105)
[LENS MEMORY LOAD]
Calls the registered lens memory. (
x
page 122)
[LEFT/RIGHT SWAP]
*1
Switches the flip horizontal settings. (
x
page 93)
*1 Only for PT-DZ13KU, PT-DS12KU, PT-DW11KU
4) Press the <ENTER> button.
[DATE AND TIME]
Set the time zone, date, and time of the built-in clock of the projector.
Setting the time zone
1) Press
as
to select [DATE AND TIME].
2) Press the <ENTER> button.
f
The
[DATE AND TIME]
screen is displayed.
3) Press
as
to select [TIME ZONE].
4) Press
qw
to switch [TIME ZONE].
Setting the date and time manually
1) Press
as
to select [DATE AND TIME].
2) Press the <ENTER> button.
f
The
[DATE AND TIME]
screen is displayed.
3) Press
as
to select [ADJUST CLOCK].
4) Press the <ENTER> button.
f
The
[ADJUST CLOCK]
screen is displayed.
5) Press
as
to select an item, and press
qw
to set the local date and time.
6) Press
as
to select [APPLY], and press the <ENTER> button.
f
The setting of the date and time will be completed.
Setting the date and time automatically
1) Press
as
to select [DATE AND TIME].