Panasonic PN261693D, Руководство пользователя, Страница: 34 / 195

34
3.4. Port Configuration Power Saving Menu
You can reduce the power consumption on your device by detecting the
connection status of port(s) and by using the power-saving mode of our original
function to adjust the power consumption to the necessary amount during the
disconnection. The Energy Efficient Ethernet (EEE) of IEEE802.3az also works well
to reduce the power consumption on the device.
In addition, the power saving mode supports two types: “Half mode” to priori
-
tize the connectivity with other devices, and “Full mode” to control the power
consumption more.
Press O (command) on the Basic Switch Configuration menu, and then you can see
Port Configuration Power Saving as Figure 3-8. You can display the status of each
port and configure each type of the power-saving mode, on this screen.
Figure 3-8: Port Configuration Power Saving Menu
Screen Description
Port Indicates the port-number.
Link Displays the status (or condition) of a current link.
Up
Indicates that the link is established normally.
Down Indicates the status that the link is not established.
Trunk Displays the configuration status of trunking as the group number.
Type Indicates types of ports.
100TX
Indicates 10/100BASE-TX.
1000T Indicates10/100/1000BASE-T.
1000X Indicates SFP port.
PNxxxxxx Local Management System
Port Configuration -> Port Configuration Power Saving Menu
Port Link Trunk Type Mode Power-Saving EEE(802.3az)
---- ------ ----- ------ ------------ ------------- ------------
1 Down --- 1000T Auto Half Disabled
2 Down --- 1000T Auto Full Disabled
3 Down --- 1000T Auto Disabled Disabled
4 Down --- 1000T Auto Disabled Disabled
5 Down --- 1000T Auto Disabled Disabled
6 Down --- 1000T Auto Disabled Disabled
7 Down --- 1000T Auto Disabled Disabled
8 Down --- 1000T Auto Disabled Disabled
9 Down --- 1000T Auto Disabled Disabled
10 Down --- 1000T Auto Disabled Disabled
11 Down --- 1000T Auto Disabled Disabled
12 Down --- 1000T Auto Disabled Disabled
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page Set Power [S]aving Mode Set [E]EE Status
[P]revious Page [Q]uit to previous menu
Command>
Enter the character in square brackets to select option