Panasonic PN261693D, Руководство пользователя, Страница: 107 / 195

107
4.4.9. Designated Topology Information (1-3-5-c)
Press I (command) on the Multiple Spanning Tree Configuration menu, and then
you can see “Designated Topology Information” as Figure 4-24. This screen dis
-
plays the configuration information on a spanning tree per port.
Figure 4-24: Designated Topology Information (1-3-5-c)
Screen Description
The following describes how to use several commands on this screen.
Port Displays the port-number.
Trunk If trunking is configured, the group number of trunking (key) is displayed.
Link Displays the link condition.
UP
Indicates the condition that a link is normally estab
-
lished.
DOWN Indicates the condition that a link is not established.
Cist Desig.Root Displays an ID of a root bridge.
Cist Desig.Cost Displays the cost, which is in the progress of being transmitted.
Cist Desig.Bridge Displays the bridge ID of a bridge specified.
Cist Desig.Port Displays a port ID of the port specified. (The port ID is the combination of
the value of a port priority and the port-number.)
N Displays the next page.
Press N (command) to display the next page.
P Displays the previous page.
Press P to display the previous page.
Q Returns to the top menu.
PNxxxxxx Local Management System
Multiple Spanning Tree Configuration -> Designated Topology Information
Cist Cist Cist Cist
Port Trunk Link Desig. Root Desig. Cost Desig. Bridge Desig. Port
---- ----- ---- ----------------- ----------- ----------------- -----------
1 --- Down 8000 xxxxxxxxxxxx 0 8000 xxxxxxxxxxxx 00 01
2 --- Down 8000 xxxxxxxxxxxx 0 8000 xxxxxxxxxxxx 00 02
3 --- Down 8000 xxxxxxxxxxxx 0 8000 xxxxxxxxxxxx 00 03
4 --- Down 8000 xxxxxxxxxxxx 0 8000 xxxxxxxxxxxx 00 04
5 --- Down 8000 xxxxxxxxxxxx 0 8000 xxxxxxxxxxxx 00 05
6 --- Down 8000 xxxxxxxxxxxx 0 8000 xxxxxxxxxxxx 00 06
7 --- Down 8000 xxxxxxxxxxxx 0 8000 xxxxxxxxxxxx 00 07
8 --- Down 8000 xxxxxxxxxxxx 0 8000 xxxxxxxxxxxx 00 08
9 --- Down 8000 xxxxxxxxxxxx 0 8000 xxxxxxxxxxxx 00 09
10 --- Down 8000 xxxxxxxxxxxx 0 8000 xxxxxxxxxxxx 00 0A
11 --- Down 8000 xxxxxxxxxxxx 0 8000 xxxxxxxxxxxx 00 0B
12 --- Down 8000 xxxxxxxxxxxx 0 8000 xxxxxxxxxxxx 00 0C
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page [P]revious Page [Q]uit to previous menu
Command>
Enter the character in square brackets to select option