Panasonic PN261693D, Руководство пользователя, Страница: 101 / 195

101
4.4.5. MSTP Instance Configuration
Press T (command) on the Multiple Spanning Tree Configuration menu to see the
MSTP Instance Configuration as Figure 4-20 below. You can configure the instance
of a spanning tree on this screen.
Figure 4-20: MSTP Instance Configuration
Screen Description
The following describes how to use several commands on this screen.
Instance Displays an MST instance ID.
VLANs Mapped Displays the VLAN ID associated with the MST instance.
N Displays the next page.
Press N (command) to display the next page.
P Displays the previous page.
Press P to display the previous page.
A Add a VLAN ID to associate with the MST instance.
1. Press A, and then the appearance of the command prompt becomes "Enter MSTP
instance ID>". Enter the instance ID of target MST.
2. As the appearance of the command prompt becomes “Enter VLAN ID>”, enter the
VLAN ID to be associated.
V Deactivate (or deselect) the association between the MST instance and a VLAN ID.
1. Press V, and then the appearance of the command prompt becomes "Enter MSTP
instance ID>", enter the target MST instance ID.
2. As the appearance of the command prompt becomes "Enter VLAN ID>", enter the VLAN
ID to deactivate the association.
PNxxxxxx Local Management System
Multiple Spanning Tree Configuration -> MSTP Instance Configuration
Instance VLANs Mapped
-------- ---------------------------------------------------------------------
0 1-4094
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page [M]ST Instance Configuration
[P]revious Page MST Instance Port [C]onfiguration
[A]dd VLAN to MST Instance MST Instance Topology [I]nformation
Remove [V]LAN from MSTP Instance [Q]uit to previous menu
[R]emove MST Instance
Command>
Enter the character in square brackets to select option