Panasonic PN261693D, Руководство пользователя, Страница: 161 / 195

161
4.12.1. PPS Configuration
PPS (Power to Progress SDN) is a function of managing two or more devices,
which configure the network with one software, and facilitates the operation and
configuration. Using this function enables to control this device from the PPS
application, which is sold separately. See the instruction manual of the PPS
application regarding the content, which can be managed from the PPS
application (sold separately).
Press F (command) on the Advanced Switch Configuration menu, and then you can
see “PPS Configuration” as Figure 4-53 below. You can configure the PPS on this
screen.
Figure 4-53: PPS Configuration
PNxxxxxx Local Management System
Advanced Switch Configuration -> PPS Configuration
PPS Global Status : Enabled
PPS Status : Controlled
PPS Start Status : CPNL
Retry Count : 3 Timeout : 3
Controller ID : xxxxxx
Controller Uptime : 000 day(s) 05 hour(s) 41 min(s) 23 sec(s)
Controller MAC Address : xx-xx-xx-xx-xx-xx
PPS Gateway : xx-xx-xx-xx-xx-xx
Controller Port : 10
Expired : 68
-------------------------------- <COMMAND> -----------------------------------
[E]nable/Disable Global PPS PPS [P]ort Configuration
Set Controller [I]D PPS Nei[g]hbor Table
Set [S]tart Status PPS [C]onnection Table
PPS [N]otification Configuration [R]estart PPS
PPS Retry C[o]unt PPS [T]imeout
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option