Panasonic PAW-HPM 1, Руководство пользователя

Страница: 7 / 52

6
1.2 Model overview and Accessories
The product range of the PAW-HPM consists of the HPM controller (with or without
display), the adapter cable (enabling communication with a split- or mono-block heat
pump) and miscellaneous sensors:
Controller type Display and Keys BUS * Web
PAW-
HPM1 X X X
PAW- HPM2 X X
* Communication with a heat pump requires additional adapter cable of model INT-X
Table 1.1: Controller types
The HPM1 is a standardized controller for systems including a heat pump. Control of
the heat pump can take place either via a contact or via communication. A HPM
controller can be used for cascade control of up to 3 heat pumps. For demand via
contact, only one HPM1 is required. When utilising cascade control via a
communication port, one HPM1 is required as a master controller and up to 2 HPM2
as slave controllers (for communication with heat pumps 2 and 3). In addition, the
HPM controllers must be connected via an Ethernet port.
Accessories Description Usage
Adapter cable:
PAW-HPMINT-U
Adapter cable, HPM-split HP, 5V,
3m Communication with a split-heat
pump
PAW-HPMINT-M
Adapter cable, HPM-mono-block
HP, 12V, 30m Communication with a MONO-
block-heat pump
Sensors:
PAW-HPMUH Outdoor sensor, -30…+70°C
For weather-dependant setpoint
calculation
PAW-HPMAH1 Clamp-on sensor, -20…+120°C
Flow temperature for the heating
circuit
PAW-HPMB1
Universal cable temperature sensor,
-30…+100°C
Domestic hot water, buffer tank
PAW-HPMSOL1
Cable temperature sensor,
-50 - +250°C Solar collector, domestic hot
water, buffer tank (high temp.)
PAW-HPMDHW
Immersion temperature sensor,
-20 - +120°C, with pocket, R1/2",
L=90mm, stainless steel Flow temperatur for heating
circuit, domestic hot water,
buffer tank
PAW-HPMR4
Room temperature sensor with
setpoint adjustment, 5 – 30°C
Room temperature and remote
setpoint potentiometer for
heating circuit
Table 1.2: Accessories
1.3 The HPM-Package
The HPM Package consists of the following components
x
Controller
x
Socket
x
Installation instruction