Panasonic PAW-HPM 1, Руководство пользователя

Страница: 34 / 52

33
Every module (except for the timer) uses the following structure:
Module library level Parameter level
E.g. district heating circuit Current values
Setpoints
Additional functions
Status
Manual operation
Service functions
Table 3.2: menu structure in a library module
The appendix contains a detailed description of the menu structure of the HPM
controller.
3.3.2 Access codes
If no access code has been entered, the controller will display only a limited amount
of information (parameters).
To display more information or to make adjustments, it is necessary to first enter an
access code:
1. If the default display is not currently shown, press ”UP” until it is.
2. Press and hold ”OK”. You will be asked to enter the access code digit by
digit.
3. Use ”-” and ”+” to select the digit.
4. Press ”OK” to enter the digit. The display will automatically jump to the
next digit.
5. When the access code has been correctly entered, it will be shown by the
controller in the display.
There are 5 different access levels:
Access Level Area of access Default Access Code
Base Level Look at all parameters in the MCS-BMS menu No code needed
Level 1 Changes in setpoints, timer, system clock 1111
Level 2 Changes in additional functions, manual operation 2222
Level 3 Changes in service functions 3333
Level 4 Changes in global menu, access codes, etc. 4444
Table 3.3: Access codes
The access codes can be adjusted in the menu “Global – service – access code”.