Panasonic PAW-HPM 1, Руководство пользователя

Страница: 20 / 52

19
External heat demand
Fig. 2.10: controlling external heat demand with up to 10 controllers
The 0…10 V inputs/outputs can be used to transfer a heat demand from one controller
to another. If one controller is used to control the heat source, the 0...10 V inputs can
be used to connect up to 9 other controllers for control of heating circuits or domestic
hot water circuits. The highest demand (highest voltage) is used for controlling the
heat source. Please refer to the operating manual for further information.
2.2.5 Output terminals
Valves
Valve + actuator with 2-point control (thermal actuator or spring return)
17
S
en
so
r
g
ro
u
n
d
Sensor N
N
16
18 Sensor L 15
19 Sensor Potential for 13 14
20
Sensor Relay
13
21 Sensor Not used 12
22 Sensor Relay 11
23 Sensor Potential for 9+11 10
24
Sensor Relay
9
25
Contact / counter Not used
P
E
8
26 Contact / counter Relay 7
27 0…10 V Potential for 5+7 6
28
0…10 V Relay
5
29
Sensor ground Not used
4
30 Not used Relay 3
31 Not used Potential for 1+3 2
32 Not used Relay 1
Fig. 2.11: Connection of valves (2-point)
Actuator with
2-point control
L