Panasonic PAW-HPM 1, Руководство пользователя

Страница: 10 / 52

9
1.4.4 System overview
To provide the user or technical personnel with a quick overview of the current
heating system, it is possible to enter a menu which will display the most relevant
parameters. These include operating and error status, setpoints, current values and
signals transmitted via the output terminals, as well as the option to adjust the
occupation time 1 and non-occupation time setpoints.
To enter the system overview menu, press “-“ while in the default display. The list of
parameters can then be scrolled through by pressing “DOWN”. For more information,
refer to the chapter “System overview”.
1.4.5 Overtime
It is possible to easily prolong the current occupation time without changing the basic
timer parameters, or to spontaneously initiate a new occupation time. This can be
performed simply by pressing “DOWN”. In the overtime menu, the overtime for each
consumer circuit (heating circuit 1, heating circuit 2 and the domestic hot water
circuit) can then be activated separately, depending on the current configuration of the
controller.
For more information, refer to the chapter “Configuration – keys”.
1.4.6 Maintenance / acknowledgment
To acknowledge errors of the heat pump(s) and to give a service technician the
possibility to service the pump(s) in question, this menu provides the possibility to
start the maintenance function (signalling demand to the heat pump for 15 minutes) or
to acknowledge/reset errors.
Pressing “UP” will bring up the Acknowledge/maintenance menu. The “DOWN” key
then permits selecting the desired parameter. The keys “+” and “-“you enables
adjusting the parameter to “ON” or “OFF”. The “OK” key is used to enter the
parameter setting.
For more information, refer to the chapter “Configuration – keys”.