Panasonic Panafax UF-9000, Руководство по обслуживанию

Страница: 83 / 188

83
UF-9000
JUN 2004
Ver. 2.0
DP-180/190
082 JAM Length 1 = 1 m
2 = 2 m Selects the maximum length of the original that can
be scanned.
083 Not Used
084 Line As No Paper 1 = Ring (ring)
2 = Busy (keep line busy)
Selects whether to ring or send a busy tone to the
remote station when the recording paper runs out or
the unit cannot receive because of any trouble.
085~
086
Not Used
087 Darker Level 0 = Lightest Contrast
~
15 = Darkest Contrast Selects the contrast level.
0
← →
15
Lightest
← →
Darkest
088 Normal Level
089 Lighter Level
090~
091
Not Used
092 Smoothing 1 = Off
2 = On Selects whether the smoothing function is available.
093 ~
094
Not Used
095 Reduction Ratio (70-100) Selects Print Reduction Ratio(%).
096 ~
101
Not Used
102 Book Top Feed -30
~
+30 Adjustment of original registration detection timing.
103 Book End Feed -9
~
0 Adjustment of trail edge void.
104~
109
Not Used
110 MAC Address Indicates the MAC Address.
111 Not Used
112 Insert EMAIL TXT 1 = Off
2 = On
Selects whether the Text Template (email message)
is programmable and added on all email sent in the
message body above the top line of text. (Up to 40
characters Programmed in the User Parameters.)
Note:
After enabling this feature, aside from entering
the text in the User Parameters, it also has to be
activated in each Auto Dial Number before it will
take effect. It does not work for Direct Dialed
Numbers.
113~
114
Not Used
115 Time Zone 1 = Scroll
2 = Direct Selects the setting method for Time Zone.
Scroll : Allows using "Scroll Keys" to scroll
through the Time Zone Table.
Direct : Allows you to input the Time Zone
directly, (*) key to be used as a switch
b/-.
116 Overwrite
Warning
1 = Yes
2 = No Selects whether the Overwrite Warning is included
on the Internet FAX Result Receipt when
programming the Auto Dialer via email.
Function Parameter Table
No. Parameter Selections Function