8
9
English
CAUTION
q
Replace the lid packing if it turns white, is scratched, or split.
(
If the appliance is tilted or tipped over, hot water may spill out, which may
cause burns.
For replacement, consult the place of purchase or a Panasonic service center.
q
Pour out any remaining hot water from the spout.
(
Pouring out from another location may result in water splashing, it may cause
malfunction or burns.
q
The kettle is only to be used with the stand provided.
Do not use power source other than the dedicated power base, or use the
power base with any other equipment.
(It may cause burns, malfunction or fire.)
q
Unplug and allow the appliance to cool down fully before cleaning and
storing.
(It may cause burns.)
q
Pay attention to the appliance when it is in use.
(It may cause fire.)
●
When leaving it, turn the power switch off.
q
Beware when pouring hot water. Pour slowly, and do not over-tilt the
appliance.
(It may cause burns.)
q
Remove the appliance from its stand before filling or pouring.
(It may cause burns.)
Important Information
●
Do not subject the body or power base to strong impacts by dropping, hitting etc.
(It may cause malfunction or damage.)
●
Do not move the body or power base by dragging.
(It may scratch the table or work surface.)
●
Do not turn the power switch on without water.
(It may cause malfunction.)
●
Do not use the appliance outdoors.
●
Do not put anything on the appliance.
(The power switch may be turned on.)
●
Make sure the kettle is properly located on the stand and mesh filter is set before
switching on.
●
Make sure to clean the appliance after every use.
)
)
Safety Precautions
Please make sure to
follow these instructions.
Part Names and Handling Instructions
Clean the appliance by following the steps below for the first time or when you have not
used it for a while.
1
Fill water up to the maximum water level and boil. (P.10)
Pour the water out from the spout. (P.11 After use, pour out any remaining water.)
Before use
0.6
1.0
Max
1.4
Lid
Body
Power base
Spout
Water level window
ON
OFF
Power
switch
Handle
Power indicator
Power base
connector
Power plug
Lid packing
Body connector
Mesh Filter
(Detachable: P.12)
Lid release
button
Power cord
