10
11
English
How to Use
1
Open the lid and fill with
water.
2
Close the lid, put the
kettle on the power base
and insert the power plug.
With another
container
Opening the lid
0.6
1.0
Max
1.4
• Press the lid
release button.
Minimum water level
Maximum water level
0.6
1.0
Max
1.4
Closing the lid
0.6
1.0
Max
1.4
• Close the
lid firmly as
illustrated until
you hear a
click.
3
Turn on the power switch.
(Press “ ”)
4
Remove from the power
base and pour.
Start boiling the
water.
(
Power indicator
lights up.
)
When the water has boiled, the power
switch turns off automatically.
• The kettle takes around 3 minutes to boil.
(
Water temperature 23°C (73°F), room
temperature 23°C (73°F), water to max
level.
• To stop boiling before the
water has boiled, turn off
the power switch.
Note
• Immediately after the water has boiled,
do not force the kettle to continue heating
the water by keeping the power switch
pressed down. (It may cause malfunction.)
)
0.6
1.0
Max
1.4
During use, the power
indicator lights up.
0.6
1.0
Max
1.4
0.6
1.0
Max
1.4
After use, pour out any remaining
water.
0.
6
1.0
M
ax
1.
4
* Keep the lid closed when pouring out
the water.
0.6
1.0
Max
1.4
Empty-use prevention function
When the power switch is on without water, an empty-use prevention function works to
automatically turn off the power in order to prevent accidents and malfunction due to
overheating.
1
Allow the body to cool sufficiently.
Remove the body from the power base and fill the water.
Place it on the power base and turn on the power switch again.
* If you boil the kettle without water, it may smell strange.
Adjusting the length of the power cord
* Pass the power cord out through the
cutout section.
(
Do not put the power base on the
power cord.
)
* Wind the power
cord on the
bottom of the
power base
to adjust the
length.
