Panasonic NCZK1, Руководство по эксплуатации

Страница: 12 / 32

12 13
English
0.6
1.0
Max
1.4

Clean the appliance after every use.

Before cleaning, unplug the power plug, pour out the hot water, and cool the body.
• Do not use soap. (This may cause a residual odor.)
• Do not use benzine, thinner, alcohol, bleach, polishing powder, metal brush or nylon
brush, otherwise the surface will be damaged.
• Do not wash in a dishwasher.
How to Clean
Body
(Outside)
Wipe with a well-wrung cloth.
(Inside)
Rub with a soft sponge and rinse.
Scale build-up
Minerals such as calcium carbonate contained
in the water build up in the kettle.
Please remove the scale.
1
Remove it regularly using:
• scale remover
Follow the instructions supplied with the
scale remover.
• citric acid
Fill the kettle with water half way up and
boil it. After switch is off, add approx. 80
g
/
2.8 oz. (2 tbsp) of citric acid and stir it well.
Let it set for approx. 30 min.
• white vinegar
Fill the kettle with water up to Max
level and boil it. After switch is off, add
approx. 100 mL / 3.4 oz. of vinegar and
stir it well. Let it set for approx. 2 hours.

After removal, repeat the following steps a
few times: fill with water, boil, pour away.
Mesh Filter
Wash carefully using a brush etc.
• If the spout is blocked by scale build-
up, hot water will pour less easily.
• After cleaning, always attach it to the
body.
How to detach
• Push the filter towards to the
spout and pull it upwards.
How to attach
• Align with the groove on the
spout and press it firmly.
Lid
Wipe with a well-wrung cloth.
Check the following before contacting the shop or requesting repair.
Problem Cause How to correct
Water does not boil.
(
Power switch does
not turn on.
)
q
Is the power plug
plugged in?
q
Insert the power plug into
the outlet. (P.10)
q
Is the body set correctly
on the power base?
q
Ensure the body is set
correctly.
q
Is the power switch
turned off?
q
Press
“ ”
, and turn on
the power switch. (P.11)
q
Is there a piece of metal
or foreign material
adhered to the power
base connector or body
connector?
q
Remove the piece
of metal or foreign
material. (P.12)
q
Once the kettle has boiled, the power switch is
automatically turned off and cannot be turned on for
approximately 3 minutes.
q
Did you try to turn on
the power switch without
water in the kettle?
(
The Empty-use
prevention function
will work to turn off the
power switch.
)
q
Fill with water and turn
on the power switch.
(P.10)
Hot water bursts out
from the spout.
q
Is the water level above
the maximum water
level?
q
Reduce the water down
to the maximum water
level or lower. (P.10)
Water is dripping from
the bottom of the
body.
q
Since the kettle is designed to sense steam and turn off
the power switch, the steam can condense and drip from
the bottom of the body as water droplets.
This is not malfunction.
Troubleshooting
Power base
Wipe with a well-wrung cloth.
To store
• Dry thoroughly.
• Seal in a plastic bag to prevent insects etc.
from entering.
Body connector
Power base
connector