Panasonic MC-V7531C, Руководство по эксплуатации

Страница: 22 / 28

- 7 -
Dust Cover
(Dust Bag
Inside)
Cubierta
de bolsa
(Bolsa está
adentro)
Dirt Sensor
Indicador
de polvo
On-Off Switch
Interruptor de
encendido-apagado
Headlight
Luz
Furniture Guard
Protector de muebles
Nozzle
Boquilla
Hose Holder
Sostenedor
de la manguera
Performance
Indicator
Indicador del
funcionamiento
Attachment
Holder
Sostenedor de
la conexión
Combination
Brush
Cepillo de la
combinación
Telescopic Handle
Mango telescópico
Cord Hook
Sujetador
del cordón
Power Cord
Cordón
electrico
Handle Height
Adjust Button
Botón de ajustar
la altura del mango
Carry Handle
Mango para
transportar
Floor Cleaning
Attachment Knob
Nozzle
Hoses
Boquillas de
la manguera
Belt Cover
Cubierta
de la correa
Exhaust
Filter (Inside
Filter Cover)
Filtro de escape
(Dentro de
cubierta de filtro)
Rating Plate
Voltímetro
Handle Release
Pedal
Pedal de
liberación del
mango
Motor Protector
(Behind Hose)
Protector de motor
(Detrás de
la manguera)
Cord Hook
Sujetador
del cordón
Extension Hose
Manguera
d’extension
Hose Holder
Sostenedor
de la manguera
Carpet-Bare
Floor Selector
Selector carpet-
bare floor
FEATURE CHART /
Diagrama de características
(PANASONIC UPRIGHT VACUUM)
(Aspiradora vertical Panasonic)
PARTS IDENTIFICATION
Identificación de piezas
- 22 -
FEATURES Power Dirt Sensor Headlight Cord Length Bare Floor
Características
Voltaje Indicador de Luz Extensión Uso sin
polvo de cordón alfombra
Model / Modelo
120V AC (60Hz)
Yes Yes 30 Ft. (9.1 m) Yes
MC-V7531 12.0 A / 12,0 A
Si Si 9,1 m (30 pi) Si
BEFORE REQUESTING SERVICE
WARNING
Electrical Shock or Personal Injury Hazard.
Disconnect the electrical supply before servicing or cleaning the unit. Failure to do so
could result in electrical shock or personal injury from cleaner suddenly starting.
Review this chart to find do-it-yourself solutions for minor performance
problems. Any service needed, other than those described in these
Operating Instructions, should be performed by an authorized service
representative.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Cleaner will 1. Unplugged at wall outlet. 1. Plug in firmly. Push ON-OFF
not run. switch to ON.
2. ON-OFF switch not turned on. 2. Push ON-OFF switch to ON.
3. Tripped thermal protector. 3. Unplug vacuum, wait thirty (30)
minutes, plug in and switch to ON.
4. Tripped circuit breaker/blown 4. Reset circuit breaker or replace
fuse at household service panel. fuse.
Poor job of dirt 1. Full or clogged dust bag. 1. Change bag.
pickup.
2. Broken belt. 2. Replace belt.
3. Carpet-bare floor setting incorrect. 3. Set in the correct position.
4. Clogged hose or nozzle. 4. Clean hose or nozzle area.
5. Hose not inserted fully. 5. Insert hose.
6. Worn agitator. 6. Replace agitator.
7. Hole in hose. 7. Replace hose.
8. Dust cover improperly installed. 8. Properly install dust cover.
9. Belt not installed on motor shaft. 9. Install belt on motor shaft.
10. Floor cleaning attachment knob in 10. Rotate valve knob to floor
the cleaning attachment position position.
Dust escapes 1. Bag improperly installed. 1. Properly install bag.
the paper bag.
2. Bag torn. 2. Replace bag.
Light will 1. Burned out light bulb. 1. Replace light bulb.
not work.
Dirt sensor will 1. Dirty optic cells. 1. Clean optic cells.
not work.