- 122 -
Others
Message Display
Confirmation messages or error messages
will be displayed on the screen in some
cases.
The major messages are described below as
examples.
[THIS MEMORY CARD IS LOCKED]
The Write-Protect switch on the SD Memory
Card and the SDHC Memory Card are moved
to [LOCK]. Move the switch back to unlock it.
(P13, 101, 107)
[NO VALID PICTURE TO PLAY]
Record a picture or insert a card with a
recorded picture and then play it.
[THIS PICTURE IS PROTECTED]
Delete or overwrite the picture after cancelling
the protect setting.
(P101)
[THIS PICTURE CANNOT BE DELETED]/
[SOME PICTURES CANNOT BE DELETED]
Pictures not based on the DCF standard
cannot be deleted. If you want to delete some
pictures, format the card after saving
necessary data on a PC etc.
(P106)
[NO ADDITIONAL DELETE SELECTIONS
CAN BE MADE]
You have exceeded the number of pictures
that can be set at one time with [MULTI] in
[DATE STAMP] or [MULTI DELETE].
Delete the set pictures or stamp the date
information on them and then do the
operation for any remaining pictures.
More than 999 favourites have been set.
[CANNOT BE SET ON THIS PICTURE]
DPOF print cannot be set for pictures not
based on the DCF standard.
[NOT ENOUGH SPACE ON BUILT-IN
MEMORY]/[NOT ENOUGH MEMORY ON
THE CARD]
There is no space left on the built-in memory
or the card.
• When you copy pictures from the built-in
memory to the card (batch copy), the
pictures are copied until the capacity of the
card becomes full.
[SOME PICTURES CANNOT BE COPIED]/
[COPY COULD NOT BE COMPLETED]
The following pictures cannot be copied.
• When a picture with the same name as the
picture to be copied exists in the copy
destination.
(Only when copying from a card to the
built-in memory.)
• Files not based on the DCF standard.
Moreover, pictures recorded or edited by
other equipment may not be copied.
[BUILT-IN MEMORY ERROR
FORMAT BUILT-IN MEMORY?]
This message will be displayed when you
formatted the built-in memory on a PC.
Format the built-in memory on the camera
again.
(P106)
The data on the built-in
memory will be deleted.
[MEMORY CARD ERROR
FORMAT THIS CARD?]
The card format cannot be recognised by the
camera. Format the card again with the
camera after saving necessary data on a PC
etc.
(P106)
[PLEASE TURN CAMERA OFF AND THEN
ON AGAIN]
This message appears when the camera is
not operating properly. Turn the camera off
and on. If the message persists, contact the
dealer or your nearest Service Centre.
