- 22 -
Preparation
LCD Monitor Display/
Switching the LCD
Monitor Display
∫
Screen display in normal picture mode
[
] (at the time of purchase)
1
Recording mode
2
Flash mode
(P42)
• If you press the shutter button halfway
when the flash is activated, the flash icon
turns red.
3
AF area
(P24)
• The AF area displayed is bigger than
usual when taking pictures in dark
places.
4
Focus
(P24)
5
Picture size
(P75)
6
Quality
(P75)
: Jitter alert
(P26)
7
Battery indication
• The indication turns red and blinks if the
remaining battery power is exhausted.
(The status indicator blinks when the
LCD monitor turns off.)
Recharge the battery or replace it with a
fully charged battery.
• It does not appear when you use the
camera with the AC adaptor (optional)
connected.
8
Number of recordable pictures
(P130)
9
Recording state
10 Built-in memory/Card
• The access indication lights red when
pictures are being recorded on the
built-in memory (or the card).
– When using the built-in memory
– When using the card
• Do not do the following when the access
indication lamps lights. The card or the
data on the card may be damaged and
this unit may no longer operate normally.
– Turn this unit off.
– Remove the battery or the card. (when
using a card)
– Shake or bump this unit.
– Disconnect the AC adaptor. (optional)
(when using the AC adaptor)
• Do not do the above when pictures are
being read or deleted or the built-in
memory (or the card) is being formatted
(P106)
.
• The access time for the built-in memory
may be longer than the access time for a
card.
11 Shutter speed
(P24)
12 Aperture value
(P24)
• If the exposure is not adequate, the
aperture value and the shutter speed
turn red. (They do not turn red when the
flash is activated.)
13 Metering mode
(P77)
14 Optical Image Stabilizer
(P78)
㧟
1/30
F2.8
14
1 2
4 5 6 7
11
12
9
3
10
13
8
