- 52 -
Advanced (Recording pictures)
Taking pictures that
match the scene being
recorded
(Scene mode)
When you select a scene mode to match the
subject and recording situation, the camera
sets the optimal exposure and hue to obtain
the desired picture.
• Refer to
P53
to
64
and “About the
information
” for details about each scene
mode.
1
Press
1
for the [SCENE MODE]
menu.
2
Press
3
/
4
/
2
/
1
to select the scene
mode.
• Press
4
at
A
to switch to the next menu
screen.
• You can switch menu screens from any
menu item by rotating the zoom lever.
3
Press [MENU/SET] to set.
• The menu screen is switched to the
recording screen in the selected scene
mode.
• Press [MENU/SET] and then perform
steps
1
,
2
and
3
to change the scene
mode.
∫
About the information
• If you press [DISPLAY] when selecting a
scene mode in step
2
, explanations about
each scene mode are displayed. (If you
press [DISPLAY] again, the screen returns
to the [SCENE MODE] menu.)
• Refer to
P45
for information about the
shutter speed.
• The flash setting is memorised even if the
camera is turned off. However, the scene
mode flash setting is reset to the initial
setting when the scene mode is changed.
• When you take a picture with a scene mode
that is not adequate for the purpose, the hue
of the picture may differ from the actual
scene.
• If you press
2
when selecting [PORTRAIT]
or [HI-SPEED BURST] in step
2
, the
[SCENE MODE] menu [
] is selected. If
you then select either the [REC] menu [
]
or the [SETUP] menu [ ], you can set the
desired items.
• The following items cannot be set in scene
mode because the camera automatically
adjusts them to the optimal setting.
– [SENSITIVITY]
– [METERING MODE]
– [COL.EFFECT]
– [PICT.ADJ.]
A
