![background image](http://html.mh-extra.com/html/panasonic/kx-vc500/kx-vc500_operating-manual_262537010.webp)
To prevent fires, electric shock, injury, or
damage to the unit, be sure to follow
these guidelines when performing any
wiring or cabling:
a.
Before performing any wiring or
cabling, unplug the unit’s power cord
from the outlet. After completing all
wiring and cabling, plug the power
cord back into the outlet.
b.
Do not place any objects on top of
the cables connected to the unit.
c.
When running cables along the floor,
use protectors to prevent the cables
from being stepped on.
d.
Do not run any cables under
carpeting.
Do not attempt to repair the power cord,
or plug. If the power cord or plug is
damaged or frayed, contact an
authorised service representative for a
replacement.
Ensure that the plug connection is free
of dust. In a damp environment, a
contaminated connector can draw a
significant amount of current that can
generate heat, and eventually cause fire
if left unattended over an extended
period of time.
Stop operation immediately if the unit
emits smoke, excessive heat, abnormal
smell or unusual noise. These conditions
can cause fire or electric shock.
Immediately turn the unit off, and unplug
the power cord, and contact your dealer
for service.
Do not connect or disconnect the AC
plug with wet hands. Danger of electric
shock exists.
When disconnecting the unit, grasp the
plug instead of the cord. Pulling on a
cord forcibly can damage it, and cause
fire or electric shock.
During thunderstorms, do not touch the
unit and plug. It may cause an electric
shock.
Operating Safeguards
Do not disassemble this unit. Only
qualified personnel should service this
unit. Disassembling the unit may expose
you to dangerous voltages or other risks.
Incorrect reassembly can cause electric
shock.
Do not alter the unit or modify any parts.
Alteration or modification can cause fire
or electric shock.
If metal fragments or water gets into the
unit, turn the unit off and unplug the unit
immediately. Contact your dealer for
service. Operating the contaminated unit
can cause fire or electric shock.
Do not insert objects of any kind into this
unit, as they may touch dangerous
voltage points or short out parts that
could result in a fire or electric shock.
Do not use a unit in the vicinity of a gas
leak to report the leak.
Do not place the remote control in
microwave ovens or on induction
cookware.
Clean the AC plug periodically with a
soft, dry cloth to remove dust and other
debris.
Do not use the supplied power cord with
any other device. It may cause fire or
electric shock.
Never open or remove unit covers that
are screwed with screws. A high-voltage
component can cause electric shock.
10
User Manual
For Your Safety